 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Contactors Bulletin 100-M, 100-C, CAB6 * Bulletin 100-M 2.2 ... 5.5 kW * Bulletin 100-C 4 ... 45 kW * Bulletin CAB6 45 ... 220 kW Pages 4-9 ... 4-64 4 Bulletin 100S, 104S Safety Contactors * Bulletin 100S, 104S 4 ... 45 kW ew N Bulletin 100-G Contactors * Bulletin 100-G 315 ... 710 kW Pages 4-65 ... 4-78 Contactor Overview AC-3 / 400 VAC 100-G (550...1200 A) CAB6 (85...420 A) 100-C (9...85 A) 100-M (5...12 A) [kW] 2.2 4 5.5 45 220 710 Rockwell Automation 4-1 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin 100-M Connection module (Eco starter) for circuit breakers 140M 4 Miniature Contactor 100-M12N... Auxiliary contact block 2 poles Auxiliary contact block 4 poles Suppressor module RC, Diode, Varistor Connecting kit Latched miniature contactor 100-ML09N... Mechanical interlock Timer for pick-up delay Timer for Y- control switching delay Reversing contactor 104-M 4-2 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin 100-M Minimum Space Requirements for Accessories Auxiliary contact blocks and timers can be mounted onto the contactor without requiring additional panel space. 4 Positive Guidance of the Contacts Positive guidance of the contacts according to IEC 60947-5-1 is given when it is ensured, that N.C. and N.O. contacts can never be closed at the same time. Therefore a minimum opening distance of 0.5 mm is prescribed in the event of failure. All contacts in the basic device are positively guided as well as the normally closed contacts in the auxiliary contact block except Bulletin 700-MB bifurcated contacts. This permits use within safety controls. High Contact Reliability Bulletin 100-M Miniature Contactors are rated for extra-low voltage. In addition to the isolation of the contact housing, high contact reliability is ensured by the special design of the auxiliary contacts: * cross-stamped in the main contactor * in the auxiliary contact block and in the bifurcated contacts (see chapter 8, Bulletin 700-M timers), H-contact bridges with constant sliding rolling motion and 4 multiple current path. Rockwell Automation 4-3 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin 100-C Connection module for circuit breakers 140M 4 Interface Suppressor module RC, Diode, Varistor Solid-State timing module for Y- control switching delay Solid-State timing module pick-up delay Connection set Contactor 100-C30, C37 Mechanical interlock Contactor 100-C09...C23 Contactor 100-C43 Contactor 100-C60...C85 Pneumatic timing module Mechanical latch Auxiliary contact blocks for side mounting 1- and 2-pole Auxiliary contact blocks for front mounting 2-pole Auxiliary contact blocks for front mounting 4-pole 4-4 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin 100-C, 100S-C Compact design Bulletin 100-C contactors switch more power and use less panel space. Despite their small dimensions, they are powerful enough for use with the high starting currents of today's modern motors. 45 mm 9 A, 12 A, 16 A, 23 A 45 mm 30 A, 37 A 54 mm 43 A 72 mm 60 A, 72 A, 85 A 4 Bulletin 100-C contactors for good connections Two separate power connections per pole offer ease of wiring and high connection reliability. The modern connection technology used by Bulletin 100-C contactors saves both time and money. (AC-3 at 400/415 V) Coil always positioned correctly The dual connection technology always positions the coil connection for optimal accessibility, whether below (on starters with circuit breakers), or above (on starters using the revolutionary Bulletin 193-E Electronic Overload relay). Space- and costsaving coil modules (interface devices, protection elements, Electronic timers) can always be added. When ordering, select the desired position of the coil connections. The position of the coil connections can also be adapted locally within seconds, using simple tools. Uniform accessories for the entire line of contactors All Bulletin 100-C accessories can be used with all contactor sizes.The mechanical interlock with integrated interlock contacts can be used alone to interlock the smallest AC contactor with the largest. Bulletin 100-C contactors for highest security Bulletin 100-C contactors are rated for high personal protection and functional security. The safety package consists of amongst other things finger and back of hand accidental contact protection. * Secure isolation of electric circuits * Positively guided contacts * Cover to prevent manual operation. Comprehensive Safety for Operating Personnel and the Machine The safety of both operators and machinery becomes more and more important. Electrical controls can play an important contribution to safety. Various rules and standards define the components and systems that are used in safety applications. * * * * Positively guided contacts according to IEC 947-5-1 Fixed coupling of contactor and auxiliary contact block Protection against unintended actuation Auxiliary contacts that are electronically compatible according to DIN 19240 Positive Guidance of the Contacts Positive guidance of contacts according to IEC 60947-5-1 is given when it is ensured, that N.C. and N.O. contacts are never able to be closed at the same time. Therefore a minimum opening distance of 0.5 mm is prescribed in the event of failure. All contacts in the basic device are positively guided as well as the normally closed contacts in the auxiliary contact block. The contacts in the basic device as well as in the auxiliary contact blocks are guided restricted. The restricted guidance also applies between basic device and accessories. Rockwell Automation 4-5 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin CAB6 Terminal block 4 Contactor CAB6-85... Star Bridge Connection set Auxiliary contact block Contactor CAB6-210... Mechanical interlock Auxiliary contact blocks Suppressor module RC, Diode, Varistor Easy-to-wire coil connections Interface integrated with CAB6-105-EI Threaded connections Max. 2 auxiliary contacts per side, left- and right-side mounted Completely enclosed arcing chamber Isolated switching position inhibits manual operation Safety lock for arcing chamber and contact holders 4-6 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin CAB6 Bulletin CAB6 Contactors with electronically controlled Coil Mechanism Bulletin CAB6 contactors are equipped with electronically controlled coil mechanisms and integrated interface starting from size CAB6-105-EI. Size CAB6-85 is equipped with conventional coils and sizes CAB6-105 and CAB6-140 can be equipped with either conventional or electronic coils. Contactors with electronic coils are characterised by the -El suffix. By offering control options, a multitude of possibilities are at the user's disposal: * Integrated interface The factory supplied CAB6-EI range features an interface module that can be activated and deactivated via an externally accessible jumper unit. With the interface, the contactor can be addressed directly by a 24 V DC signal from a programmable logic controller. The max. allowable current of the interface is 15 mA (DIN VDE 19240). The Interface input is separated from the coil circuit by photoelectric. * Protective circuit included All EI-type contactors have a protective circuit as standard. * Low pick-up and holding power When compared with conventional contactors, the current requirement is substantially lowered by the construction of the contactor, particularly via the electronic control. * Wide voltage range Despite the wide voltage range (e.g., 208...277 V AC) the min./max. values of the IEC tolerances are kept between -0.85 and +1.1. * Compact dimensions New, compact construction solutions and the application of electronics substantially reduces the dimensions. Two housing sizes cover the entire range from 85...420 A (AC-3). Simple and efficient wiring is ensured by the identical connection height of the main pole on both housing sizes. 110 mm Bulletin CAB6 contactors can be mechanically interlocked, without needing additional mounting space. 4 CAB6-85...170 CAB6-210...420 * Defined on- and off- points Electronic control guarantees defined points of switching on and off, thus preventing chatter and damage to the contactor. * Environmentally friendly Construction and contact materials do not contain cadmium, asbestos or PCBs and can be recycled at the end of the contactor life. Most plastic parts are characterised according to DIN 54840. * Frame terminal blocks Go safe! Contact protection is fulfilled by attachable terminal covers according to DIN VDE 0106 and VBG 4. By using framework terminal blocks the contactor automatically becomes finger-safe per IP20. Rockwell Automation 4-7 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6, 100-G Contactors Overview - Bulletin 100-G / CA 5 Supply module Contactor 100-G / CA 5 Mechanical interlock (horizontal construction) 4 Auxiliary contact block Mechanical interlock (vertical construction) Fourth pole Coil sets Mechanical latch Good reasons to select Rockwell Automation contactors * Allen-Bradley contactors are built for a global marketplace and fulfill all applicable IEC 947 requirements. * Worldwide acceptance and high stock availability in all countries increases security for the user. * A wide range of accessories (e.g., auxiliary contact blocks, interfaces, control and timing modules) make contactors ideal and economical building blocks for individual control needs. 4-8 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Bulletin 100-M Miniature Contactors * Bulletin 100-M 2.2 ... 5.5 kW (5 ... 12 A) Bulletin 100-C, CAB6 Contactors * Bulletin 100-C 4 ... 45 kW (9 ... 85 A) * Bulletin 104-C 4 ... 45 kW (9 ... 85 A) * Bulletin CAB6 45 ... 220 kW (85 ... 420 A) 4 Bulletin 100S, 104S Safety Contactors * Bulletin 100S-C 4 ... 45 kW (9 ... 85 A) * Bulletin 104S-C 4 ... 45 kW (9 ... 85 A) Table of Contents Description Product Selection AC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 DC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Special Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Reversing Contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Safety Contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Accessories Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Mounting Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31 Labelling Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33 Renewal Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33 Page Description Specifications Page Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Performance Data / Characteristics . . . . . . . . . . . . . . . . . . . . .4-36 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-44 Standards and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-49 Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-51 Permissible Switching Rate . . . . . . . . . . . . . . . . . . . . . . . . . . .4-57 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-61 Rockwell Automation 4-9 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection 3-pole Contactors * AC control * 3 main contacts 4 100-M 100-C 100-C CAB6 AC-1 (40 C) [A] 20 230 V 1.5 Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] 400 / 415 V 2.2 500 V 2.2 690 V -- 230 V 6.5 [A] 400 / 415 V 5.3 500 V 4 690 V -- Auxiliary Contacts Integrated Cat. No. PQ 1 0 100-M05N 0 1 100-M05N 1 0 100-M09N 20 3 4 4 -- 12 9 7 -- 0 1 100-M09N 1 0 100-M12N 20 3 5.5 4 -- 12 12 7 -- 0 1 100-M12N 1 0 100-C09 32 3 4 4 4 12 9 7 5 0 1 100-C09 1 0 100-C12 32 4 5.5 5.5 5.5 15 12 10 7 0 1 100-C12 1 0 100-C16 32 5.5 7.5 7.5 7.5 20 16 14 9 0 1 100-C16 1 0 100-C23 32 7.5 11 13 10 26.5 23 20 12 0 1 100-C23 0 0 100-C30 50 10 15 15 15 35 30 25 18 0 0 100-C37 50 11 18.5 / 20 20 18.5 38 37 30 21 0 0 100-C43 85 13 22 25 22 44 43 38 25 0 0 100-C60 100 18.5 32 37 32 62 60 55 34 0 0 100-C72 100 22 40 45 40 72 72 67 42 0 0 100-C85 100 25 45 55 45 85 85 80 49 0 0 CAB6-85-00160 25 45 55 80 85 85 85 85 1 1 CAB6-85-110 0 CAB6-105-001 1 CAB6-105-11160 32 55 63 100 105 105 105 105 0 0 CAB6-105-EI-001 1 CAB6-105-EI-110 0 CAB6-140-0080 110 140 140 115 115 1 1 CAB6-140-11250 45 75 0 0 CAB6-140-EI-0090 132 140 140 140 140 1 1 CAB6-140-EI-110 0 CAB6-170-EI-00250 55 90 / 100 110 160 170 170 170 170 1 1 CAB6-170-EI-110 0 CAB6-210-EI-00350 63 110 150 200 210 210 210 210 1 1 CAB6-210-EI-110 0 CAB6-250-EI-00350 80 132 / 150 160 250 250 250 250 250 1 1 CAB6-250-EI-110 0 CAB6-300-EI-00450 90 160 200 300 300 300 300 300 1 1 CAB6-300-EI-110 0 CAB6-420-EI-00500 132 220 / 250 420 420 300 425 420 420 1 1 CAB6-420-EI-11Bulletin CAB contactors are suitable for use with operating voltages up to 1000V. Bulletin CAB6-...-El contactors are equipped with electronic coil control Power ratings: Preferred values according to IEC 60072-1 Value applies only to AC-2 and AC-3 Value applies only to AC-2 and AC-3; AC-4: 360 A PQ = Package Quantity Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 3 31 3 31 3 31 10 01 10 01 10 01 10 01 00 00 00 00 00 00 1 1 4-10 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Selection of Options Options Coil connection position Voltage suffix code Package quantity 100-M Package quantity 100-C Cat. No. Suffix No Entry U e.g. KJ No Entry S No Entry M Description Line-side coil connection (above, standard quantity) Load-side coil connection (below) Voltage suffix code from table below Multi-pack (10 pieces) (Only KD, D, KF, KK) Single item (1 piece, standard quantity) Single item (1 piece, standard quantity) Multi-pack (20 pieces) Ordering Example 100-C0910 100-C09U10 100-C09KJ10 100-M09N3 100-M09N3S 100-C0910 100-C0910M 4 ! 100-M Attention: Bulletin 100-M...S: standard quantity = single item (1 piece) Bulletin 100-C, CAB6: standard quantity = single item (1 piece) Voltage Suffix Codes for AC Control [V] 50 Hz 60 Hz 50/60 Hz [V] 50 Hz 60 Hz 50/60 Hz [V] 50 Hz 60 Hz 50/60 Hz [V] CAB6-85...CAB6-140 50 Hz 60 Hz 50/60 Hz [V] CAB6-105-EI...CAB6-250-E 50/60 Hz 24 -- -- KD 12 (R) (Q) -- 48 -- -- KH 24 (K) (J) KJ 110 D -- -- 32 (V) -- -- 110120 -- D -- 36 (W) (V) -- 240 230 -- -- KF 42 (X) -- -- 277 -- (T) -- 110 10 -- (48) 220- 230230 240 (A) -- -- 48 (Y) (X) KY 347 -- (I) -- 127 -- 10 -- -- (A) -- 100 240 -- -- (KT) 100110 380- 400400 415 KK -- -- 110 (D) -- KD 400 -- -- KN 240 (15) -- (55) KK -- 120 (P) (D) -- 400415 (G) -- -- 260 -- 13 -- 127 (S) -- -- 440 (B) (N) (KB) 277 -- (15) -- 200 200220 200- 208230 240 -- -- (KL) 550 (C) -- -- 440460 -- 16 -- -- (L) -- 600 -- (C) -- 480 -- (17) -- 100-C (KP) -- -- (KP) (KP) -- 380 -- (E) -- 220230 13 -- -- 380400 (N) -- -- 230 -- -- 54 (KG) -- -- (KG) (KG) -- 480 -- (B) -- 380400 16 -- -- 500 (M) -- -- 415 (17) -- -- 220230230 230 240 (F) -- -- 24 05 -- -- 2428 05 -- -- -- KF 28 -- 05 -- 4365 08 08 (VA) (T) -- (A) -- (KA) 48 08 -- -- 55 -- 08 -- 110- 208- 380130 277 400 10 10 14 14 16 16 CAB6-300-EI...CAB6-420-EI 50/60 Hz Price Adder for: Special control voltages Type 100-M 100-C CAB6-85...CAB6-140 Available Control Voltages 12...500 V 50 Hz, 12...600 V 60 Hz 12...600 V 50 Hz, 12...600 V 60 Hz 21...550 V 50 Hz, 21...575 V 60 Hz, 110...240 V 50/60 Hz No Surcharge > 25 pieces > 20 pieces > 25 pieces ( ) Control voltages in parentheses: No inventory 50/60 Hz coil only available for CAB6-85 and 105 Signal voltage of the CAB6...EI electronic interface: Ue: 24 VDC / Ie: 15 mA Logical 1: 13.0 VDC...30.2 VDC Logical 0: -3.0 VDC...+5.0 VDC Accessories - Site 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 Rockwell Automation 4-11 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection 3-pole Contactors * DC control * 3 main contacts 4 100-M..Z 100-C..Z 100-C..Z CAB6 AC-1 (40 C) [A] 20 230 V 1.5 Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] 400 / 415 V 2.2 500 V 2.2 690 V -- 230 V 6.5 [A] 400 / 415 V 5.3 500 V 4 690 V -- Auxiliary Contacts Internal Cat. No. PQ 1 0 100-M05N 3 1 100-M05N 31 0 0 100-M09N 3 1 20 3 4 4 -- 12 9 7 -- 1 100-M09N 31 0 0 100-M12N 3 1 20 3 5.5 4 -- 12 12 7 -- 0 1 100-M12N 31 0 100-C09 10 1 32 3 4 4 4 12 9 7 5 1 100-C09 01 0 0 100-C12 10 1 32 4 5.5 5.5 5.5 15 12 10 7 1 100-C12 01 0 0 100-C16 10 1 32 5.5 7.5 7.5 7.5 20 16 14 9 0 1 100-C16 01 0 100-C23 10 1 32 7.5 11 13 10 26.5 23 20 12 1 100-C23 01 0 50 10 15 15 15 35 30 25 18 0 0 100-C30 00 100-C37 00 50 11 18.5 / 20 20 18.5 38 37 30 21 0 0 100-C43 00 85 13 22 25 22 44 43 38 25 0 0 100-C60 00 100 18.5 32 37 32 62 60 55 34 0 0 1 100-C72 00 100 22 40 45 40 72 72 67 42 0 0 100-C85 00 100 25 45 55 45 85 85 80 49 0 0 160 25 45 55 80 85 85 85 85 2 2 CAB6-85-L22 2 2 CAB6-105-L22 160 32 55 63 100 105 105 105 105 0 0 CAB6-105-EI-00 1 1 CAB6-105-EI-11 80 110 140 140 115 115 2 2 CAB6-140-L22 250 45 75 0 0 CAB6-140-EI-00 90 132 140 140 140 140 1 1 CAB6-140-EI-11 0 0 CAB6-170-EI-00 250 55 90 / 100 110 160 170 170 170 170 1 1 CAB6-170-EI-11 1 0 0 CAB6-210-EI-00 350 63 110 150 200 210 210 210 210 1 1 CAB6-210-EI-11 0 0 CAB6-250-EI-00 350 80 132 / 150 160 250 250 250 250 250 1 1 CAB6-250-EI-11 0 0 CAB6-300-EI-00 450 90 160 200 300 300 300 300 300 1 1 CAB6-300-EI-11 0 0 CAB6-420-EI-00 500 132 220 / 250 300 425 420 420 420 420 1 1 CAB6-420-EI-11 Bulletin CAB contactors are suitable for use with operating voltages up to 1000V. Bulletin CAB6-...-El contactors are equipped with electronic coil control Power ratings: Preferred values according to IEC 60072-1 Value applies only to AC-2 and AC-3 Value applies only to AC-2 and AC-3; AC-4: 360 A PQ = Package Quantity Accessories - Site 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 4-12 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Selection of Options Options Coil connection position Voltage suffix code Package quantity 100-M Package quantity 100-C Cat. No. Suffix No Entry U e.g. ZJ No Entry S No Entry M Description Line-side coil connection (above, standard quantity) Load-side coil connection (below) Voltage suffix code from table below Multi-pack (10 pieces) (Only Z24, ZD24) Single item (1 piece, standard quantity) Single item (1 piece, standard quantity) Multi-pack (20 pieces) Ordering Example 100-C0910 100-C09U10 100-C09ZJ10 100-M09N3 100-M09N3S 100-C0910 100-C0910M 4 ! 100-M Attention: Bulletin 100-M...S: standard quantity = single item (1 piece) Bulletin 100-C, CAB6: standard quantity = single item (1 piece) Voltage Suffix Codes for DC Control [V] DC with diode protection circuit DC 100-C09...C43 DC with diode protection circuit DC 100-C60...C85 DC with diode protection circuit DC CAB6-85...CAB6-140 [V] DC CAB6-105-EI...CAB6-300-EI CAB6-420-EI [V] DC DC 24 Z24 ZD24 (ZR) -- -- (DR) 24 66 2428 66 -- 48 (Z48) -- 12 (ZQ) -- -- (DQ) 48 (70) 4872 (70) (70) 110 Z11 -- 24 ZJ DJ -- DJ 110 76 90135 76 -- 220 (Z2) 36 48 60 64 72 80 110 ZD -- -- DD 115 125 220 230 250 [V] 9 (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) -- -- -- -- -- -- -- -- -- -- -- -- (DW) (DY) (DZ) (DB) (DG) (DE) 220 (86) 110135 -- 76 170- 190255 255 (86) -- -- (86) (ZP) (ZS) (ZA) (ZF) (ZT) -- -- -- -- -- -- -- -- -- -- (DP) (DS) (DA) (DF) (DT) Price Adder for: Special control voltages Type 100-M..Z 100-C..Z CAB6-85...CAB6-140 Available Control Voltages 12...250 VDC 12...250 VDC 24...240 VDC No Surcharge > 25 pieces > 20 pieces > 25 pieces () Control voltages in parentheses: No inventory Extended operating limits 0.65...1.3 x Us Extended operating limits 0.7...1.25 x Us With conventional DC control, the pickup winding must be interconnected with the late-breaking auxiliary contacts Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 Rockwell Automation 4-13 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Special Versions * AC / DC control * * 4-pole contactors * Latched contactors 4 100-M 100-C 100-ML 4-pole Contactors Bulletin 100-M, 100-C AC-1 (40C) [A] 20 32 230 V 3 7.5 Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] 400 / 415 V 4 11 500 V 4 13 690 V -- 10 230 V 12 26.5 [A] 400 / 415 V 9 23 500 V 7 20 690 V -- 12 4 4 3 2 0 0 1 2 AC/DC AC/DC 100-M09N 100-C23 100-C23 AC/DC 100-C23 4 400 300 200 Main Poles (Fitted) Available Options Cat. No. PQ (4-pole 100-C09...C16 contactors available upon request) Latched Contactors Bulletin 100-ML AC-1 (40C) Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) Auxiliary Contacts Latched Contactors Available Options Cat. No. PQ [kW] [A] 20 230 V 3 400 / 415 V 4 500 V 4 690 V -- 230 V 12 [A] 400 / 415 V 9 500 V 7 690 V -- 1 0 0 1 AC AC 100-ML09N3 100-ML09N31 1 Options Coil connection position Tension de commande Package quantity 100-M Package quantity 100-C Cat. No. Suffix No Entry U e.g. KJ No Entry S No Entry M Description Line-side coil connection (above, standard quantity) Load-side coil connection (below) Voltage suffix code from table below Multi-pack (10 pieces) (Only KD, D, KF, KK, Z24, ZD24) Single item (1 piece, standard quantity) Single item (1 piece, standard quantity) Multi-pack (20 pieces) Ordering Example 100-C23400 100-C23U400 100-C23KJ400 100-M09N4 100-M09N4S 100-C23400 100-C23400M AC-4 value only for contact assembly with 3 resp, 4 N.O. contacts Power ratings: Preferred values according to IEC 60072-1 No inventory ! Attention: Bulletin 100-M...S: standard quantity = single item (1 piece) Bulletin 100-C: standard quantity = single item (1 piece) PQ = Package Quantity Accessories - Site 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 4-14 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Voltage Suffix Codes for AC Control [V] 100-M 50 Hz 60 Hz 50/60 Hz [V] 50 Hz 60 Hz 50/60 Hz [V] 50 Hz 60 Hz 50/60 Hz 24 -- -- KD 12 (R) (Q) -- 220230 (F) -- -- 48 -- -- KH 24 (K) (J) KJ 230 -- -- KF 110 D -- -- 32 (V) -- -- 230240 (VA) -- -- 110120 -- D -- 36 (W) (V) -- 240 (T) (A) (KA) 230 -- -- KF 42 (X) -- -- 277 -- (T) -- 220230 (A) -- -- 48 (Y) (X) KY 347 -- (I) -- 230240 -- (A) -- 100 (KP) -- (KP) 380 -- (E) -- 240 -- -- (KT) 100110 -- (KP) -- 380400 (N) -- -- 380400 KK -- -- 110 (D) -- KD 400 -- -- KN 400415 KK -- 120 (P) (D) -- 400415 (G) -- -- 127 (S) -- -- 440 (B) (N) (KB) 200 200220 200230 -- -- (KL) 550 (C) -- -- 208240 -- (L) -- 600 -- (C) -- 100-C (KG) -- -- (KG) (KG) -- 480 -- (B) -- 500 (M) -- -- 4 Voltage Suffix Codes for DC Control 100-M DC with diode protection circuit DC 100-C09...C43 DC with diode protection circuit DC 100-C60...C85 DC with diode protection circuit DC [V] 24 48 110 220 (Z2) 36 48 60 (ZZ) -- -- (DZ) 64 72 80 110 ZD -- -- DD 115 125 220 (ZA) -- -- (DA) 230 (ZF) -- -- (DF) 250 (ZT) -- -- (DT) Z24 (Z48) Z11 ZD24 -- -- [V] 9 12 24 ZJ DJ -- DJ (ZR) (ZQ) -- -- -- -- (DR) (DQ) (ZW) (ZY) -- -- -- -- (DW) (DY) (ZB) (ZG) (ZE) -- -- -- -- -- -- (DB) (DG) (DE) (ZP) (ZS) -- -- -- -- (DP) (DS) Price Adder for: Special control voltages Type 100-M 100-C Available Control Voltages 12...500 V 50 Hz, 12...600 V 60 Hz, 12...250 VDC 12...600 V 50 Hz, 12...600 V 60 Hz, 12...250 VDC No Surcharge > 25 pieces > 20 pieces ( ) Control voltages in parentheses: No inventory Extended operating limits 0.65...1.3 x Us Extended operating limits 0.7...1.25 x Us Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 Rockwell Automation 4-15 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Reversing Contactors * 3 main contacts, coil connections above * Mechanical / Electrical interlock included * Wiring set for main pole interconnection included 4 AC-1 (40C) [A] 20 20 20 32 32 32 32 50 50 85 100 100 100 Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] [A] Auxiliary Contact per Contactor Auxiliary Contact on Interlock Cat. No. PQ 230 V 400 / 415 V 500 V 690 V 230 V 400 / 415 V 500 V 690 V 1.5 3 3 3 4 5.5 7.5 10 11 13 18.5 22 25 2.2 4 5.5 4 5.5 7.5 11 15 18.5 / 20 22 32 40 45 2.2 4 4 4 5.5 7.5 13 15 20 25 37 45 55 -- -- -- 4 5.5 7.5 10 15 18.5 22 32 40 45 6.5 12 12 12 15 20 26.5 35 38 44 62 72 85 5.3 9 12 9 12 16 23 30 37 43 60 72 85 4 7 7 7 10 14 20 25 30 38 55 67 80 -- -- -- 5 7 9 12 18 21 25 34 42 49 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 1 1 1 0 0 0 0 0 0 0 0 2 0 2 0 2 0 2 2 2 0 0 0 104-M05N 104-M05N 104-M09N 104-M09N 104-M12N 104-M12N 104-C09 104-C09 104-C12 104-C12 104-C16 104-C16 104-C23 104-C23 104-C30 104-C37 104-C43 104-C60 104-C72 104-C85 3 31 3 31 3 31 10 00 10 00 10 00 10 00 00 00 00 10 10 10 1 -E -E -E -E -E -E -E -E -E -E -E -E -E -E 1 Bulletin CAB contactors are suitable for use with operating voltages up to 1000V. Bulletin CAB6-...-El contactors are equipped with electronic coil control 160 25 45 55 80 85 85 85 85 1 1 0 CAU B6-85CAU B6-105160 32 55 63 100 105 105 105 105 1 1 0 CAU B6-105-EI80 110 140 140 115 115 1 1 0 CAU B6-140250 45 75 CAU B6-140-EI90 132 140 140 140 140 1 1 0 250 55 90 / 100 110 160 170 170 170 170 1 1 0 CAU B6-170-EICAU B6-210-EI350 63 110 / 125 150 200 210 210 210 210 1 1 0 350 80 132 / 150 160 250 250 250 250 250 1 1 0 CAU B6-250-EICAU B6-300-EI450 90 160 200 300 300 300 300 300 1 1 0 CAU B6-420-EI500 132 220 / 250 300 425 420 420 420 420 1 1 0 10 10 10 10 10 10 10 10 10 10 1 Options Mechanical interlock Mechanical interlock Voltage suffix code Cat. No. Suffix No Entry -X No Entry M e.g. KJ Description with mechanical interlock (standard) without mechanical interlock without mechanical interlock (standard) with mechanical interlock Voltage suffix code from the table on the next page Ordering Example 104-M05N3 104-M05N3-X CAU-B6-105-EI-10 CAUMB6-105-EI-10 104-M05NKJ3 Power ratings: Preferred values according to IEC 60072-1 DC-control only available without mechanical interlock For electronic interlock additional N.C. contacts required Value applies only to AC-2 and AC-3 Bulletin 100-MCA00 mechanical interlock. Electrical interlock via the front mounted auxiliary contact block (2 pole) Value applies only to AC-2 and AC-3; AC-4: 360 A PQ = Package Quantity Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 4-16 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Voltage Suffix Codes for AC Control [V] 104-M 50 Hz 60 Hz 50/60 Hz [V] 50 Hz 60 Hz 50/60 Hz 24 -- -- KD 12 48 -- -- KH 24 (K) (J) KJ 110 D -- -- 32 110220- 230230 240 120 230 240 -- -- (A) -- -- D -- -- (A) -- -- KF -- -- (KT) 10036 42 48 100 110 (W) (X) (Y) (KP) -- (V) -- (X) -- (KP) -- -- KY (KP) -- 380240 277 347 380 400 (T) -- -- -- (N) (A) (T) (I) (E) -- (KA) -- -- -- -- 22055 110 127 230 230 -- 10 -- 13 -- 08 -- 10 -- -- -- (48) -- -- 54 208- 380277 400 14 16 14 16 380- 400400 415 KK -- KK -- -- 110 (D) -- KD 120 127 200- 200208208 220 230 240 (KG) -- -- -- -- -- (KG) -- (H) (L) (KG) -- (KL) -- -- 200 104-C (R) (Q) -- 220[V] 230 (F) 50 Hz -- 60 Hz 50/60 Hz -- [V] 24 (V) -- -- 230230 240 -- (VA) -- -- KF -- 28 48 CAUB6-85...CAUB6-140 50 Hz 60 Hz 50/60 Hz CAUB6-105-EI...CAUB6-250-EI CAUB6-300-EI...CAUB6-420-EI 05 -- -- 24[V] 28 50/60 Hz 05 50/60 Hz -- -- 08 05 -- -- -- 43- 11065 130 08 10 08 10 (P) (S) (D) -- -- -- 400400 440 480 500 550 600 415 -- (G) (B) -- (M) (C) -- -- -- (N) (B) -- -- (C) KN -- (KB) -- -- -- -- 380440240 260 277 415 480 400 460 (15) -- -- 16 (17) -- -- -- 13 (15) -- -- 16 (17) (55) -- -- -- -- -- -- 4 Voltage Suffix Codes for DC Control 104-M [V] 24 48 110 220 Z24 DC ZD24 with diode protection circuit DC [V] 9 104-C09...C43 DC (ZR) -- with diode protection circuit DC 104-C60...C85 DC -- (DR) with diode protection circuit DC [V] 24 CAB6-85...CAB6-140 DC 66 24[V] CAB6-105-EI...CAB6-300-EI 28 66 DC -- CAB6-420-EI DC Price Adder for: Special control voltages Type 104-M 104-C CAUB6-85...CAUB6-140 () E Control voltages in parentheses: No inventory Wiring per IEC standard 50/60 Hz coils for CAB6-140 contactor not available Extended operating limits 0.65...1.3 x Us Extended operating limits 0.7...1.25 x Us (Z48) Z11 (Z2) -- -- 12 24 36 48 60 64 72 80 110 115 125 220 230 250 (ZQ) ZJ (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) ZD (ZP) (ZS) (ZA) (ZF) (ZT) -- DJ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (DQ) DJ (DW) (DY) (DZ) (DB) (DG) (DE) DD (DP) (DS) (DA) (DF) (DT) 48 110 220 (70) 76 (86) 4890- 110- 170- 19072 135 135 255 255 (70) 76 -- (86) -- (70) -- 76 -- (86) Available Control Voltages 12...500 V 50 Hz, 12...600 V 60 Hz, 12...250 VDC 12...600 V 50 Hz, 12...600 V 60 Hz, 12...250 VDC 21...550 V 50 Hz, 21...575 V 60 Hz, 110...240 V 50/60 Hz, 24...240 VDC No Surcharge > 25 pieces > 20 pieces > 25 pieces Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 Rockwell Automation 4-17 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Safety Contactors * * * * * * AC / DC control 3 / 4 main contacts Positively guided contacts according to IEC 947-5-1 Mechanically coupled Contactor and Auxiliary contact block Protection against unintended actuation Auxiliary contacts are electronically compatible according to DIN 19240 4 With 3 Main Contacts AC-1 (40C) [A] 32 230 V 3 Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] 400 / 415 V 4 500 V 4 690 V 4 230 V 11.5 [A] 400 / 415 V 9 500 V 7 690 V 5 0 1 2 0 1 2 0 1 2 0 1 2 0 2 0 2 0 2 0 2 0 2 0 2 5 4 3 5 4 3 5 4 3 5 4 3 4 2 4 2 4 2 4 2 4 2 4 2 100S-C0905C 100S-C0914C 100S-C0923C 100S-C1205C 100S-C1214C 100S-C1223C 100S-C1605C 100S-C1614C 100S-C1623C 100S-C2305C 100S-C2314C 100S-C2323C 100S-C3004C 100S-C3022C 100S-C3704C 100S-C3722C 100S-C4304C 100S-C4322C 100S-C6004C 100S-C6022C 100S-C7204C 100S-C7222C 100S-C8504C 100S-C8522C Positively Guided Auxiliary Contacts Cat. No. PQ 32 4 5.5 5.5 5.5 14.5 12 10 7 32 5.5 7.5 7.5 7.5 20 16 / 15 13 9.3 32 50 50 85 100 100 100 7.5 10 11 13 18.5 22 25 11 15 18.5 22 30 37 45 11 15 18.5 22 30 37 45 10 15 18.5 22 30 37 45 24 34 37 42 62 70 85 23 / 22 30 / 29 37 / 36 43 / 41 60 / 58 72 / 69 85 / 82 18 24 30 34 45 56 67 12 17 20 25 34 42 49 1 With 4 Main Contacts AC-1 (40C) [A] 230 V Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] 400 / 415 V 500 V 690 V 230 V [A] 400 / 415 V 500 V 690 V 0 0 2 2 4 4 2 2 100S-C23404C 100S-C23304C 100S-C23422C 100S-C23322C Positively Guided Auxiliary Contacts Cat. No. PQ 32 7.5 11 11 10 24 23 / 22 18 12 1 PQ = Package Quantity Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 4-18 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Product Selection Reversing-Safety Contactors * * * * * * * * * AC / DC control 3 main contacts, coil connections above Positively guided contacts acc. to IEC 947-5-1 Mechanically coupled Contactor and Auxiliary contact block Protection against unintended actuation Auxiliary contacts are electronically compatible according to DIN 19240 Mechanical / Electrical interlock included Wiring set for main pole interconnection included Positively Guided Aux. contact per Contactor Cat. No. 690 V 5 7 9.3 12 17 20 25 34 42 49 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 4 4 104S-C09012C 104S-C09010C 104S-C12012C 104S-C12010C 104S-C16012C 104S-C16010C 104S-C23012C 104S-C23010C 104S-C30010C 104S-C30008C 104S-C37010C 104S-C37008C 104S-C43010C 104S-C43008C 104S-C60010C 104S-C60008C 104S-C72010C 104S-C72008C 104S-C85010C 104S-C85008C PQ 4 With 3 Main Contacts AC-1 (40C) [A] 32 32 32 32 50 50 85 100 100 100 230 V 3 4 5.5 7.5 10 11 13 18.5 22 25 Switching of 3-phase Motors AC-2, AC-3, AC-4 (60 C) [kW] 400 / 415 V 4 5.5 7.5 11 15 18.5 22 30 37 45 500 V 4 5.5 7.5 11 15 18.5 22 30 37 45 690 V 4 5.5 7.5 10 15 18.5 22 30 37 45 [A] 230 V 400 / 415 V 500 V 11.5 14.5 20 24 34 37 42 62 70 85 9 12 16 / 15 23 / 22 30 / 29 37 / 36 43 / 41 60 / 58 72 / 69 85 / 82 7 10 13 18 24 30 34 45 56 67 1 Voltage Suffix Codes for AC Control [V] 50 Hz 60 Hz 50/60 Hz 12 24 (K) (J) KJ 230 -- -- KF 32 36 42 (X) -- -- 277 -- (T) -- 48 (Y) (X) KY 347 -- (I) -- (R) (Q) -- 220[V] 230 50 Hz (F) 60 Hz -- 50/60 Hz -- (V) (W) -- (V) -- -- 230240 240 (VA) (T) -- (A) -- (KA) 100110 (KP) -- -- (KP) (KP) -- 380380 400 -- (N) (E) -- -- -- 100 110 (D) -- KD 400 -- -- KN 120 127 (P) (S) (D) -- -- -- 400440 415 (G) (B) -- (N) -- (KB) 110 ZD -- -- DD 200- 200- 208220 230 240 (KG) -- -- -- -- (KG) -- (L) (KG) -- (KL) -- 200 480 -- (B) -- 500 (M) -- -- 550 (C) -- -- 600 -- (C) -- 100S-C. 104S-C Voltage Suffix Codes for DC Control 100S-C09...C43, 104S-C09...C43 DC with diode protection circuit DC 100S-C60...C85, 104S-C60...C85 DC with diode protection circuit DC Price Adder for: Special control voltages [V] 9 12 24 36 48 60 64 72 80 (ZR) (ZQ) ZJ (ZW) (ZY) (ZZ) (ZB) (ZG) (ZE) -- -- DJ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (DR) (DQ) DJ (DW) (DY) (DZ) (DB) (DG) (DE) 115 125 220 230 250 (ZP) (ZS) (ZA) (ZF) (ZT) -- -- -- -- -- -- -- -- -- -- (DP) (DS) (DA) (DF) (DT) No Surcharge > 20 pieces Type 100S-C. 104S-C Available Control Voltages 12...600 V 50 Hz, 12...600 V 60 Hz, 12...250 VDC Extended operating limits 0.65...1.3 x Us Extended operating limits 0.7...1.25 x Us ( ) Control voltages in parentheses: No inventory Power ratings: Preferred values according to IEC 60072-1 With mechanical and electrical locking 100-MCA02 Accessories - Page 4-24 Specifications - Page 4-36 Dimensions - Page 4-61 Rockwell Automation 4-19 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Assignment of Contacts Contactors with 3 Main Contacts 51 61 71 81 51 61 71 81 53 61 71 83 52 62 72 82 1 3 5 21 52 62 72 82 1 3 5 13 54 62 72 84 1 3 5 21 2 4 6 22 2 4 6 14 2 4 6 22 4 100S-C0905C...C2305C 100S-C0914C...C2314C 100S-C0923C...C2323C 11 21 31 41 13 21 31 43 12 22 32 42 1 3 5 14 22 32 44 1 3 5 2 4 6 2 4 6 100S-C3004C...C8504C 100S-C3022C...C8522C Contactors with 4 Main Contacts 11 21 31 41 11 21 31 41 12 22 32 42 1 3 5 7 12 22 32 42 1 3 5 R1 2 4 6 8 2 4 6 R2 100S-C23404C 100S-C23304C 13 21 31 43 13 21 31 43 14 22 32 44 1 3 5 7 14 22 32 44 1 3 5 R1 2 4 6 8 2 4 6 R2 100S-C23422C 100S-C23322C Product Selection - Page 4-10 4-20 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Assignment of Contacts Reversing-Safety Contactors with 3 Main Contacts 51 61 71 81 21 51 61 71 81 51 61 71 81 51 61 71 81 52 62 72 82 1 3 5 21 22 21 52 62 72 82 1 3 5 21 52 62 72 82 1 3 5 21 52 62 72 82 1 3 5 21 2 4 6 22 22 2 4 6 22 2 4 6 22 2 4 6 22 104S-C09012C...C23012C 104S-C09010C...C23010C 4 51 61 71 81 21 51 61 71 81 51 61 71 81 51 61 71 81 52 62 72 82 1 3 5 22 21 52 62 72 82 1 3 5 52 62 72 82 1 3 5 52 62 72 82 1 3 5 2 4 6 22 2 4 6 2 4 6 2 4 6 104S-C30010C...C85010C 104S-C30008C...C85008C Product Selection - Page 4-10 Rockwell Automation 4-21 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Assignment of Contacts Device Combinations in Accordance with EN Standards Auxiliary Contact Blocks 100-C0910 100-C1210 100-C1610 100-C2310 A1 K1 A2 2 4 6 14 1 3 5 13 K1 A2 2 4 6 22 Contactors 100-C (AC / DC Control) 100-C0901 100-C1201 100-C1601 100-C2301 A1 1 3 5 21 K1 A2 2 4 6 Circuit Diagram Control 100-C3000 100-C3700 100-C4300 100-C6000 100-C7200 100-C8500 A1 1 3 5 100-C23400 100-C23300 100-C23200 A1 K1 A2 1 3 5 7 A1 K1 1 3 5 R1 K1 A1 1 R1 R3 3 2 4 6 8 A2 2 4 6 R2 A2 2 R2 R4 4 4 Front-mounted 51 61 100-FA02 52 62 53 61 AC / DC AC / DC 54 62 13 21 10 + 02 = 12 10 + 11 = 21 -- 10 + 11 = 21 10 + 20 = 30 -- 10 + 22 = 32 -- 10 + 22 = 32 10 + 31 = 41 10 + 40 = 50 10 + 22 = 32 01 + 02 = 03 01 + 11 = 12 -- 01 + 11 = 12 01 + 20 = 21 -- 01 + 22 = 23 -- -- 01 + 31 = 32 01 + 40 = 41 01 + 22 = 23 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 20 = 20 00 + 11 = 11 00 + 22 = 22 00 + 22 = 22 -- 00 + 31 = 31 00 + 40 = 40 00 + 22 = 22 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 20 = 20 00 + 11 = 11 00 + 22 = 22 00 + 22 = 22 -- 00 + 31 = 31 00 + 40 = 40 00 + 22 = 22 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 20 = 20 00 + 11 = 11 00 + 22 = 22 00 + 22 = 22 -- 00 + 31 = 31 00 + 40 = 40 00 + 22 = 22 00 + 02 = 02 00 + 11 = 11 00 + 11 = 11 -- 00 + 20 = 20 00 + 11 = 11 00 + 22 = 22 00 + 22 = 22 -- 00 + 31 = 31 00 + 40 = 40 00 + 22 = 22 100-FA11 100-FB11 14 22 23 31 AC / DC AC / DC 24 32 53 63 100-FC11 100-FA20 54 64 17 25 AC / DC AC / DC 18 26 53 61 71 83 100-FBL11 100-FA22 54 62 72 84 13 21 31 43 AC / DC AC / DC 14 22 32 44 21 31 43 53 100-FB22 100-FC22 22 32 44 54 53 61 73 83 AC / DC AC / DC 54 62 74 84 100-FA31 53 63 73 83 100-FA40 54 64 74 84 53 61 75 87 AC / DC AC / DC 54 62 76 88 100-FAL22 Side-mounted 21 100-SB01 22 13 100-SB10 14 43 11 21 100-SB02 12 22 31 41 13 21 100-SB11 14 22 13 23 31 43 100-SB20 14 24 17 25 100-SBL11 18 26 35 47 Product Selection - Page 4-10 4-22 33 43 34 44 32 44 36 48 32 42 32 AC / DC 31 44 10 + 01 = 11 01 + 01 = 02 00 + 01 = 01 00 + 01 = 01 00 + 01 = 01 00 + 01 = 01 AC / DC 10 + 10 = 20 01 + 10 = 11 00 + 10 = 10 00 + 10 = 10 00 + 10 = 10 00 + 10 = 10 AC / DC 10 + 02 = 12 -- 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 00 + 02 = 02 AC / DC 10 + 11 = 21 01 + 11 = 12 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 AC / DC 10 + 20 = 30 01 + 20 = 21 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 00 + 20 = 20 AC / DC 10 + 11 = 21 01 + 11 = 12 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 00 + 11 = 11 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Assignment of Contacts Device Combinations in Accordance with EN Standards Auxiliary Contact Block Circuit Diagram Control 100-M05N3 100-M09N3 100-M12N3 A1 K1 A2 2 4 6 14 1 3 5 13 Miniature Contactor 100-M (AC / DC Control) 100-M05N31 100-M09N4 100-M09N31 100-M12N31 A1 K1 A2 2 4 6 8 1 3 5 7 K1 A2 2 4 6 22 A1 1 3 5 21 Front-mounted 21 31 195-MB02 22 32 AC / DC 21 33 10 + 02 = 12 10 + 11 = 21 10 + 20 = 30 10 + 22 = 32 40 + 02 = 42 40 + 11 = 51 40 + 20 = 60 40 + 22 = 62 -- -- 01 + 20 = 21 -- 4 195-MB11 22 34 AC / DC 53 63 195-MA20 54 64 43 53 21 31 AC / DC AC / DC 44 54 22 32 195-MB22 53 63 73 83 195-MA40 54 64 74 84 AC / DC 10 + 40 = 50 40 + 40 = 80 01 + 40 = 41 Auxiliary Contact Block CAB6-85-00 CAB6-105-00 CAB6-140-00 Contactors CAB6 (AC / DC Control) CAB6-85-11 CAB6-105-11 CAB6-140-11 CAB6-85-L11 CAB6-105-L11 CAB6-140-L11 CAB6-85-L22 CAB6-105-L22 CAB6-140-L22 CAB6-140-EI-00 CAB6-170-EI-00 CAB6-210-EI-00 CAB6-250-EI-00 CAB6-300-EI-00 CAB6-420-EI-00 A1 K1 1 3 5 K1 A2 2 4 6 A2 2 4 6 14 22 Circuit Diagram Control CAB6-140-EI-11 CAB6-170-EI-11 CAB6-210-EI-11 CAB6-250-EI-11 CAB6-300-EI-11 CAB6-420-EI-11 A1 1 3 5 13 21 A1 K1 A2 1 3 5 K1 A1 1 3 5 13 21 A1 K1 B1 1 3 5 43 35 A1 K1 B1 1 3 5 13 21 43 35 2 4 6 A2 2 4 6 14 22 A2 2 4 6 44 36 A2 2 4 6 14 22 44 36 Right-side mounted 43 31 CAB6-P2-11 44 32 83 71 CAB6-P4-11 84 72 43 35 CAB6-P2-L11 44 36 31 CAB6-P2-B11 32 34 AC DC AC / DC AC DC AC / DC AC DC AC / DC AC DC AC / DC AC DC AC / DC AC DC AC / DC AC DC AC / DC 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00+ 11 = 11 -- -- 00+ 11 =11 -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- -- 11+ 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 22 + 11 = 33 -- -- 22 + 11 = 33 -- -- 22 + 11 = 33 -- -- 22 + 11 = 33 -- -- 22 + 11 = 33 -- -- 22 + 11 = 33 -- -- 22 + 11 = 33 -- -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00 + 11 = 11 -- -- 00+ 11 = 11 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = L22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 -- -- 11 + 11 = 22 Left-side mounted 13 21 CAB6-P1-11 14 22 53 61 CAB6-P3-11 54 62 61 CAB6-P3-B11 62 64 Up to 8 auxiliary contacts possible: Contactor + Front-mounted (AC max. 4 N.C:/DC max. 4 N.C.), Side-mounted (AC max. 2 N.O./DC max. 2 N.O. and max. 2 N.C.) Early make and/or late break Double numbering: Because of double numbering only left-side mounting is recommended Electronically suited auxiliary contact block Product Selection - Page 4-10 Rockwell Automation 4-23 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules: Auxiliary Contact Blocks Description Circuit Diagram 21 31 For Use with 100-M...3 Cat. No. 195-MB02 PQ 22 32 21 33 4 Auxiliary Contact Blocks for Front Mounting * 2- and 4-pole * Simple and quick attachment - no tools needed * Electronically compatible H-contacts * Contacts themselves in auxiliary contact block positively guided * Types with the same functions with several connection numbering variants 100-M 22 34 53 63 195-MB11 100-M 54 64 43 53 21 31 195-MA20 10 44 54 22 32 53 63 73 83 100-M...3, 100-M...4 195-MB22 100-M 54 64 74 84 51 61 195-MA40 100-C 52 62 53 61 100-FA02 100-C 54 62 13 21 100-FA11 C3000...C8500 14 22 23 31 100-FB11 C0910...C2310 24 32 53 63 100-FC11 Auxiliary Contact Blocks for Front Mounting * 2- and 4-pole * Simple and quick attachment - no tools needed * Electronically compatible contacts * Positive guidance in auxiliary and with main contactor poles (excluding type L) * Types with the same functions with several connection numbering variants L = Early Make/Late Break 100-C 54 64 17 25 100-FA20 C3000...C8500 18 26 53 61 71 83 100-FBL11 100-C 54 62 72 84 21 31 43 53 100-FA22 C0910...C2310 22 32 44 54 13 21 31 43 100-FC22 C3000...C8500 14 22 32 44 53 61 73 83 100-FB22 100-C 54 62 74 84 53 63 73 83 100-FA31 100-C 54 64 74 84 53 61 75 87 100-FA40 100-C 54 62 76 88 100-FAL22 PQ = Package Quantity Product Selection - Page 4-10 4-24 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules: Auxiliary Contact Blocks Description Circuit Diagram 21 32 For Use with Cat. No. PQ 100-C 22 13 31 14 12 22 13 21 32 44 31 41 14 22 13 23 34 44 31 43 17 25 18 26 100-SB01 13 21 14 22 43 31 Auxiliary Contact Blocks * Up to 4 auxiliary contact blocks per contactor: P1 and P3 left, P2 and P4 right * With mechanical interlock -- 2 auxiliary contact blocks per contactor, 1 left and 1 right * No change of base dimensions with 1 auxiliary contact block on each side 44 32 53 61 54 62 83 71 84 72 43 35 * Electronically compatible auxiliary contacts AC-1 AC-15, DC-13 250 V 0.1 A 3 ... 125 V 1 ... 100 mA 32 34 61 62 64 Options Package quantity Cat. No. Suffix No Entry M Description Single pack (1 piece, standard quantity) Multi-pack (10 pieces) Up to 8 auxiliary contacts possible: Contactor + Front-mounted (AC max. 4 N.C:/DC max. 4 N.C.), Side-mounted (AC max. 2 N.O./DC max. 2 N.O. and max. 2 N.C.) Double numbering: Because of double numbering 100-C09 ... 100-C23 only left-side mounting is recommended PQ = Package Quantity Rockwell Automation 33 43 32 42 Auxiliary Contact Blocks for Side Mounting * 1- and 2-pole * Dual numbering for left- or right-side mounting on contactor * Simple and quick attachment - no tools needed * Electronically compatible contacts * Positive guidance in auxiliary and with main contactor poles (excluding type L) L = Early Make/Late Break 11 21 36 48 35 47 44 14 24 44 36 31 100-C, 100S-C 100-SB10 4 100-SB02 43 100-C 100-C 100-SB11 100-C, 100S-C 100-SB20 100-C CAB6 Left-side mounting CAB6 Right-side mounting CAB6 Left-side mounting CAB6 Right-side mounting CAB6 Right-side mounting CAB6 Right-side mounting CAB6 Left-side mounting 100-SBL11 CAB6-P1-11 CAB6-P2-11 CAB6-P3-11 CAB6-P4-11 10 CAB6-P2-L11 CAB6-P2-B11 CAB6-P3-B11 Ordering Example 100-SB10. 100-SB10M Product Selection - Page 4-10 4-25 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules: Timer Description Electronic Star-Delta Timing Relay Output Y picks up when the supply voltage is applied and resets again after time t. After a fixed changeover time tu output relay picks up and remains energised until the supply voltage is interrupted. Circuit Diagram Single Selectable Timing Range Use the catalogue * 22.5 mm width number with the appropriate code. Supply Voltage (A1/A2) Timing range U23 24...48 VDC C 0.5...10 s 24...240 VAC, 50/60 Hz A1/A2 D U 1.5...30 s A40 346...440 VAC, 50/60 Hz 0.05...1 min t 17/18 E F 0.15...3 min 17/28 tu=50...65 ms G 0.5...10 min LED For Use with Cat. No. PQ 4 100-M, 100-C, CAB6 700-FSY2U23 on request: 700-FSY2A40 1 L A1 17 * 17.5 mm width A2 18 28 Supply Voltage (A1/A2) U23 24...48 VDC 24...240 VAC, 50/60 Hz N Multiple Adjustable Timing Ranges 0.15 s...10 min (3s) 0.15...3 s (10s) 0.5...10 s (1mn) 0.05...1 min (10mn) 0.5...10 min 100-M, 100-C, CAB6 700-FEY2QU23 1 ~ S1 O/I Timer After the set time has elapsed, the timer operates and the contactor in series is energised. K1 N 1 Pick-up Delay 1...3 s 1...30 s 100-M with 110...250 V 50/60 Hz / 110...250 VDC 10 196-MT3S 196-MT30S 2 ~ S1 O/I 1 K2 2 Y K3 Y K1 N K2 K2 K3 Y Timer for Y- Switching After the set time has elapsed, the K3 contactor (Y) is de-energised and then after a time of 90 30 ms the K2 contactor () is energised. Setting Time Y Contactor 1...30 s 1...30 s 100-M with 110...120 V 50/60 Hz 100-M with 220...250 V 50/60 Hz 100-M with 48 V 50/60 Hz 100-C with AC control 196-MTSDA1 196-MTSDA2 10 1...30 s 196-MTSDA3 67 55 Pneumatic Timer Pneumatic timing contacts switch after the set time; the contacts on the main contactor operate without delay. * Continuous adjustment range 68 56 65 57 Pick-up Delay 0.3...30 s 1.8...180 s Drop-out Delay 0.3...30 s 1.8...180 s 100-FPTA30 100-FPTA180 1 All 100-C 66 58 100-FPTB30 100-FPTB180 PQ = Package Quantity Product Selection - Page 4-10 4-26 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules: Timer Description Circuit Diagram L For Use with 100-C with 110...240 V 50/60 Hz 110...250 VDC Pick-up Delay 0.1...3 s 1...30 s 10...180 s Cat. No. 100-ETA3 100-ETA30 100-ETA180 PQ Electronic Timing Modules Delay of the contactor magnetic coil * Continuous adjustment range * High repeat accuracy 100-ETA The contact closes after the delay time elapses. S A1 A1 K1M A2 N L A1 100-C with 24...48 VDC 100-ETAZJ3 100-ETAZJ30 100-ETAZJ180 1 t 4 A1 (K1M) L S A1 B2 100-ETB After interruption of the control signal, the contactor is switched off after the delay time elapses. Drop-out Delay 0.3...3 s 1...30 s 10...180 s 100-C09...C37 with 24 V 50/60 Hz 100-ETBKJ3 100-ETBKJ30 100-ETBKJ180 1 A1 K1M A2 N L B2 A1 (K1M) L S D1 Y1 t 100-C with 110...240 V 50/60 Hz 100-ETB3 100-ETB30 100-ETB180 100-ETY After the set Y time elapses the K3 contact (Y) switches off and the K2 Contactor () switches on (Switching delay t 90 ms). Y A1 H A2 N L H A1 Y A1 D A1 D A1 Y A2 D A1 A2 Setting Time Y Contactor 1...30 s 100-C with 110...240 V 50/60 Hz 100-ETY30 1 t t PQ = Package Quantity Product Selection - Page 4-10 Rockwell Automation 4-27 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules: Mechanical Interlocks Description Mechanical Interlock * For interlocking of two adjacent contactors * Without additional space requirement attachable from rear and recessed in top hat rail Mechanical Interlock * For interlocking of two adjacent contactors * Mechanical and electrical interlock in one module possible by means of integrated auxiliary contacts * Contactors with AC control: 100-C09...100-C85 and * Contactors with DC control: 100-C60...100-C85 can be interlocked any way desired Attention: Contactors with DC-control: 100-C09...100-C43 can only be interlocked with contactors of the same type! * 9 mm connection piece included * Circuit Diagram For Use with Cat. No. PQ 100-M with AC control 199-MXM1 10 4 100-C without auxiliary contacts 21 21 100-MCA00 22 22 100-C 100-MCA02 with 2 N.C. auxiliary contacts Mechanical Interlock * For interlocking of two adjacent contactors * One component for the interlock of all Bulletin CAB6 contactors * For mounting between two contactors; no additional space required CAB6 CMB6 10 Options Package quantity Cat. No. Suffix No Entry M Description Single pack (1 piece, standard) Multi-pack (10 pieces) Ordering Example 100-MCA00 100-MCA00M PQ = Package Quantity Product Selection - Page 4-10 4-28 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules Description Circuit Diagram L1~/L+ 0 For Use with Cat. No. PQ Mechanical Latch In latching contactors, the contactor coil is immediately switched off after the contact on the latch closes (65-66); consequently, no holding current flows. Can be used for both AC and DC operation * Auxiliary contacts 1 N.O. + 1 N.C. I 57 65 K1R 58 66 A1 K1M N~/LA2 K1R K1M 14 E1 E2 13 100-C with AC control 100-FL11 1 4 Output Interface (electronic) Interface between the DC control signal (PLC) and the contactor AC operating mechanism. * Control voltage 18...30 VDC (10...15 mA) * For coil voltages of 110...240 VAC * Suitable for all Bulletin 100-C contactors * Switching capacity 200 VA * Requires no overvoltage protection for the coils L Input A1 E2 E1 24 VDC A1 K1M A2 N L E1 A1 (K1M) 100-JE 100-C, 100S-C with AC control 110 ... 12 VDC 240 VAC 48 VDC 100-JE12 100-JE48 DeviceNet System Accessory Module * Includes complete terminal connector set * Screw- or snap-on mounting to 35 mm DIN Rail EN 50 022 * For product information, see chapter 15 (description, specifications and dimensions) 120 V AC, 2 inputs 1 relay output 24 V DC, 2 inputs 1 relay output 24 V DC, 2 inputs 1 transistor output 120 V AC, 4 inputs 2 relay outputs 24 V DC, 4 inputs 2 relay outputs 24 V DC, 4 inputs 2 transistor outputs 100-DNY21R 100-DNY22R 100-DNY22S 100-DNY41R 100-DNY42R 100-DNY42S 1 Options Voltage suffix code Package quantity Cat. No. Suffix e.g. KJ No Entry M Description Voltage suffix code from table below Single pack (1 piece, standard) Multi-pack (10 pieces) Ordering Example 100-FL11KJ 100-JE 100-JEM Voltage Suffix Code for AC Control [V] 50 Hz 60 Hz 50/60 Hz [V] 50 Hz 60 Hz 50/60 Hz Price Adder for: Special control voltages Type 100-FL11 12 (R) (Q) -- 220230 (F) -- -- 24 (K) (J) KJ 230 -- -- KF 32 (V) -- -- 230240 (VA) -- -- 36 (W) (V) -- 240 (T) (A) (KA) 42 (X) -- -- 277 -- (T) -- 48 (Y) (X) KY 347 -- (I) -- 100 (KP) -- (KP) 380 -- (E) -- 100110 -- (KP) -- 380400 (N) -- -- 110 (D) -- KD 400 -- -- KN 120 (P) (D) -- 400415 (G) -- -- 127 (S) -- -- 440 (B) (N) (KB) 200 (KG) -- (KG) 480 -- (B) -- 200220 -- (KG) -- 500 (M) -- -- 200230 -- -- (KL) 550 (C) -- -- 208240 -- (L) -- 600 -- (C) -- 100-FL11 Available Control Voltages 12...500 V 50 Hz / 12...600 V 60 Hz No Surcharge > 20 pieces ( ) Control voltages in parentheses: No inventory PQ = Package Quantity Product Selection - Page 4-10 Rockwell Automation 4-29 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Modules: Suppressor Modules Description Circuit Diagram RC Module AC control 24...48 VAC 110...240 VAC 24...48 VAC 110...280 VAC 380...480 VAC Diode Circuit DC control 12...250 VDC Varistor Circuit AC/DC control 12...55 VAC / 12...77 VDC 56...136 VAC / 78...178 VDC 137...277 VAC / 181...350 VDC RC Module RC 24...48 VAC RC 110...280 VAC RC 380...480 VAC 24...48 V 50/60 Hz 110...280 V 50/60 Hz 380...480 V 50/60 Hz Diode Circuit Suppressor Module for 100-C Contactors For limiting switching overvoltage of the solenoids. * Can be plugged into coil terminals of all 100-C contactors 12...250 VDC Varistor Circuit 12...55 VAC / 12...77 VDC 56...136 VAC / 78...180 VDC 137...277 VAC / 181...350 VDC 278...575 VAC 12...55 VAC / 12...77 VDC 56...136 VAC / 78...180 VDC 137...277 VAC / 181...350 VDC 278...575 VAC Contact Safety Control 24...250 VDC For Use with Cat. No. PQ 2-wire version 4 Suppressor Module for 100-M05 / M09/M12 Contactors For limiting surge voltage when coil circuits are interrupted. 199-MSMA48 10 199-MSMA1 199-MSMNA48 100-M 199-MSMNA280 199-MSMNA480 199-MSMD1 2-wire version 100-M 199-MSMD2 10 100-M 199-MSMV4 199-MSMV5 199-MSMV6 100-FSC48W 100-FSC280W 100-FSC480W 100-FSC48 100-FSC280 100-FSC480 100-FSD250W 100-FSD250 10 2-wire version 100-C, 100S-C with AC control 2-wire version 100-C,100S-C with DC control 2-wire version 100-C, 100S-C with AC / DC control All 100-C 100-FSV55W 100-FSV136W 100-FSV277W 100-FSV575W 100-FSV55 100-FSV136 100-FSV277 100-FSV575 100-FCC250W Suppressor Module for CAB6 Contactors For limiting surge voltage when coil circuits are interrupted. * Can be plugged into all CAB6 contactors * Integrated EI- and DC control in the protective circuit, or delivered with separate suppressor module For overvoltage category IV (IEC 947 for CAB6...-EI) e.g., lightning protection requirements RC Module (AC control) 21...48 V 50 Hz / 24...55 V 60 Hz 95...110 V 50 Hz / 110...127 V 60 Hz CAB6-85... CAB6-140 190...240 V 50 Hz / 220...277 V 60 Hz 380...550 V 50 Hz / 440...575 V 60 Hz Varistor-Modul for contactors with conventional control 55 VAC CAB6-85... 56...136 VAC CAB6-140 137...277 VAC 278...575 VAC for contactors with electronic control CAB6-105-EI... 24...28 VAC CAB6-250-EI CAB6-105-EI... 24...28 VDC CAB6-300-EI 48...72 VDC 43...65 VAC CAB6-105-EI... 208...277 VAC CAB6-420-EI 380...400 VAC Description Single pack (1 piece, standard) Multi-pack (10 pieces) CRCB6-48 CRCB6-110 CRCB6-240 CRCB6-550 10 CRVB6-55 CRVB6-136 CRVB6-277 CRVB6-575 10 CRVB6-40 CRVB6-55 CRVB6-75 CRVB6-550 CRVB6-460 Options Package quantity Cat. No. Suffix No Entry M Ordering Example 100-FSC48 100-FSC48M Product Selection - Page 4-10 4-30 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Mounting Materials Description Adapter * For easy, toolless mounting of timers on to DIN Rails EN 50 022-35 and G Rails Connection Pieces * To link contactors (100-C) into combinations Terminal Blocks * Set of 2 * Protection class IP20 per IEC 529 and DIN 40 050 Single wedge 0 mm Wedge-type connector9 mm For CAB6-85 / CAB6-105 For CAB6-105-EI / CAB6-170-EI For CAB6-210-EI...CAB6-420-EI For CAB6-85, CAB6-105 For CAB6-140, CAB6-105-EI...CAB6-170-EI For CAB6-210-EI, CAB6-250-EI, CAB6-300-EI, CAB6-420-EI For connecting to CAB6-85...170-EI For connecting to CAB6-210-EI...420-EI Cat. No. 196-MTM PQ 10 100-S0 100-S9 CAB6-HB1 CAB6-HB2 CAB6-HB3 CAB6-105-HU CAB6-170-HU 825-ML630 10 1 4 Terminal Blocks UL / CSA * Set of 3 1 Control Circuit Terminal * 2 x 2.5 mm2 CAB6-AT CAB6-AT2 10 Single Covers * Set of 2 * Protection class IP10 per IEC 529 and DIN 40 050 For CAB6-85, CAB6-105 For CAB6-140, CAB6-105-EI...CAB6-170-EI For CAB6-210-EI...CAB6-420-EI CAB6-HA1 CAB6-HA2 CAB6-HA3 1 Mounting Plate * Galvanised passivated steel plate for combination For CAB6-85...CAB6-170-EI For direct-on-line starter For reversing or two-speed starters For Y- or Dahlander starters For CAB6-210-EI...CAB6-420-EI For direct-on-line starter For reversing or two-speed starters For Y- or Dahlander starters CAB6-105-PS CAB6-105-PU CAB6-105-PY 1 CAB6-250-PS CAB6-250-PU CAB6-250-PY Cover to Protect against Manual Operation * Protection against unintended manual operation * For contactors and auxiliary contacts in safety circuits For 100-C09..100-C85 For 100-FA, 100-FB, 100-FC, 100-FP, 100-FL 100-SCC 100-SCF PQ = Package Quantity Product Selection - Page 4-10 Rockwell Automation 4-31 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Mounting Materials Description Connection Modules * The connection module allows a safe and easy electrical and mechanical connection of contactor and circuit breaker * For DOL, reversing, and star-delta starters Connects: Bulletin 140-M-C circuit breakers with Bulletin 100-M miniature contactors Connects: Bulletin 140-MN circuit breakers with Bulletin 100-M miniature contactors Connects: Bulletin 140-MN circuit breakers with Bulletin 100-C contactors Without buttons Enclosures For Bulletin 100-C contactors with Bulletin overload relays 193-E * For DOL starters * Protection Class IP66 * Prestampings for two pilot lights With blue RESET button With green and red buttons: START / STOP, RESET With green and extended red buttons: START / STOP, RESET With blue RESET button With green and red buttons: START / STOP, RESET With green and extended red buttons: START / STOP, RESET For Use with Cat. No. PQ 140M-C-PEM12 140-KCD4 10 4 140-NW23 100-C09...C23 198E-AYMN2 198E-AYMU1 198E-AYMU2 198E-AYMU4 198E-AYNU1 198E-AYNU2 198E-AYNU4 198E-AYMU3 198E-AYMU5 198E-AYNU3 198E-AYNU5 140-LR120 140-LR240 140-LR400 140-LG120 140-LG240 140-LG400 140-LW120 140-LW240 140-LW400 100-C09...C23 1 100-C30...C37 With white and black buttons: START / STOP, RESET 100-C09...C23 With white and extended black buttons: START / STOP, RESET With white and black buttons: START / STOP, RESET 100-C30...C37 With white and extended black buttons: START / STOP, RESET red Pilot Light * Mounting with plug-in coupling in upper enclosure part * Connection cable length 180 mm * Incl. glow lamp green white 120 V 240 V 400 V 120 V 240 V 198E-AY 400 V 120 V 240 V 400 V 10 Auxiliary Contact (START) * For use with Cat. No. 198E-AY... enclosure 100-C 100-SD10 Options Package quantity Package quantity Cat. No. Suffix No Entry M No Entry M Description Single pack (1 piece, standard quantity) Multi-pack (20 pieces) Single pack (1 piece, standard quantity) Multi-pack (10 pieces) Ordering Example 140M-C-PEM12 140M-C-PEM12M 100-SD10 100-SD10M PQ = Package Quantity Product Selection - Page 4-10 4-32 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Mounting Materials Description Cat. No. PQ Connection Kits Connection kits ease the wiring of reversing and star-delta starters, help to prevent wiring errors and therefore considerably contribute to cost minimizing. Reversing switching Connection Kits * For reversing switching * For star-delta switching 100-M 140-KCR4 10 Star-Delta switching 100-M 140-KCSD4 4 Connection Kits * For reversing switching * For star-delta switching Connecting Sets 100-C09...100-C23 100-C30...100-C37 100-C43 100-C60...100-C85 Star-Delta switching 100-C09...100-C23 100-C30...100-C37 100-C43 100-C60...100-C72 100-C85 For Bulletin CAB6-85 ... CAB6-170-EI Contactors 45 mm2 input connections (for CAB6-..HU) 50 mm2 input connections (for CAB6-..HB) 45 mm2 output connections (for CAB6-..HU) 50 mm2 output connections (for CAB6-..HB) Neutral bridge for CAB6-85...CAB6-170-EI For Bulletin CAB6-210-EI ... CAB6-420-EI Contactors 120 mm2 input connections (for CAB6-..HB3 and CAB6-..HU) 120 mm2 output connections (for CAB6-..HU) 120 mm2 output connections (for CAB6-..HB) For Y-contactor CAB6-140-EI...CAB6-170-EI; 80 mm2 For Y-contactor CAB6-210-EI...CAB6-250-EI; 120 mm2 For Y-contactor CAB6-210-EI...CAB6-250-EI; 120 mm2 (for CAB6-..HB) Neutral bridge for CAB6-210-EI...CAB6-420-EI Reversing switching 105-PW23 105-PW37 105-PW43 105-PW85 170-PW23 170-PW37 170-PW43 170-PW72 170-PW85 CAB6-105-VLHU CAB6-105-VLHB CAB6-105-VT CAB6-105-VTHB CAB6-105-VYU CAB6-250-VL CAB6-250-VT CAB6-250-VTHB CAB6-250-VY CAB6-250-VT CAB6-250-VTHB CAB6-250-VYU 1 1 Labelling Material * Uniform labelling materials for contactors, motor protection devices, timing relays, and circuit breakers Product information and ordering statements see chapter 3 Renewal Parts Description For Use with CAB6-85 CAB6-105 CAB6-105-EI CAB6-140-EI CAB6-170-EI CAB6-210-EI CAB6-250-EI CAB6-300-EI CAB6-420-EI CAB6-85 CAB6-105 CAB6-105-EI CAB6-140 CAB6-140-EI CAB6-170-EI CAB6-210-EI CAB6-250-EI CAB6-300-EI CAB6-420-EI Cat. No. PQ CAB6-85-ARC CAB6-105-ARC CAB6-105-EI-ARC CAB6-140-EI-ARC CAB6-170-EI-ARC 1 CAB6-210-EI-ARC CAB6-250-EI-ARC CAB6-300-EI-ARC CAB6-420-EI-ARC CAB6-85-CONT-1 CAB6-105-CONT-2 CAB6-105-EI-CONT-22 CAB6-140-CONT-33 CAB6-140-EI-CONT-3 1 CAB6-170-EI-CONT-4 CAB6-210-EI-CONT-5 CAB6-250-EI-CONT-6 CAB6-300-EI-CONT-7 CAB6-420-EI-CONT-8 Arc Chambers for Contactors * For 3-Pole CAB6 contactors Main Contacts for Contactors * Set for 3-Pole CAB6 contactors Product Selection - Page 4-10 Rockwell Automation 4-33 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Renewal Parts: Coils for Bulletin 100-C, 100S-C Contactors 4 AC Control Voltage 50 Hz 12 V 24 V 24 V 24 V 32 V 36 V 42 V 48 V 100 V 110 V 120 V 127 V 200 V 36 V 48 V 48 V 100...110V 120 V 110 V 60 Hz 12 V 50/60 Hz AC 100-C09... 100-C23... 100-C43 100-C60... 100-C16 100-C37 100-C85 DC Control Voltage Coil Code PQ = 10 PQ = 1 Cat. No. Q R J K KJ V W X Y KY KP D KD P S KG KL L A F KF VA T KA I E N KN G 480 V 440 V B KB M C Type 100-C09 ... 100-C85 For special voltages, please contact sales office TA006 TA404 TA013 TA407 TA855 TA481 TA410 TA482 TA414 TA860 TA861 TA473 TA856 TA425 TA428 TA862 TA864 TA296 TA474 TA441 TA851 TA440 TA480 TA858 TA065 TA067 TA071 TA863 TA457 TA475 TA859 TA479 TA476 Cat. No. TC006 TC404 TC013 TC407 TC855 TC481 TC410 TC482 TC414 TC860 TC861 TC473 TC856 TC425 TC428 TC862 TC864 TC296 TC474 TC441 TC851 TC440 TC480 TC858 TC065 TC067 TC071 TC863 TC457 TC475 TC859 TC479 TC476 Cat. No. TD006 TD404 TD013 TD407 TD855 TD481 TD410 TD482 TD414 TD860 TD861 TD473 TD856 TD425 TD428 TD862 TD864 TD296 TD474 TD441 TD851 TD440 TD480 TD858 TD065 TD067 TD071 TD863 TD457 TD475 TD859 TD479 TD476 Cat. No. TE006 TE404 TE013 TE407 TE855 TE481 TE410 TE482 TE414 TE860 TE861 TE473 TE856 TE425 TE428 TE862 TE864 TE296 TE474 TE441 TE851 TE440 TE480 TE858 TE065 TE067 TE071 TE863 TE457 TE475 TE859 TE479 TE476 250 V diode circuit included DC 100-C09... 100-C23... 100-C43 100-C60... 100-C85 Coil 100-C16 100-C37 Code PQ = 10 PQ = 1 Cat. No. ZR DR ZQ DQ ZJ DJ ZW DW ZY DY ZZ DZ ZB DB ZG DG ZE DE ZD DD ZP DP ZS DS ZA DA ZF DF ZD DT TA766 -- TA708 -- TA714 TA714M TA719 -- TA724 -- TA774 -- TA727 -- TA728 -- TA729 -- TA733 -- TA734 -- TA737 -- TA747 -- TA749 -- TA751 -- Cat. No. TC766-- TC708 -- TC714 TC714M TC719 -- TC724 -- TC774 -- TC727 -- TC728 -- TC729 -- TC733 -- TC734 -- TC737 -- TC747 -- TC749 -- TC751 -- Cat. No. TD766-- TD708 -- TD714 TD714M TD719 -- TD724 -- TD774 -- TD727 -- TD728 -- TD729 -- TD733 -- TD734 -- TD737 -- TD747 -- TD749 -- TD751 -- Cat. No. -- TE766M -- TE708M -- TE714M -- TE719M -- TE724M -- TE774M -- TE727M -- TE728M -- TE729M -- TE733M -- TE734M -- TE737M -- TE747M -- TE749F -- TE751F VDC 9V 12 V 24 V 36 V 48 V 60 V 64 V 72 V 80 V 110 V 115 V 125 V 220 V 230 V integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode integr. diode diode circuit included 200...220V 200...230 V 208...240 V 240 V 230 V 220 V 220...230 V 230...240 V 240 V 277 V 240 V 347 V 380 V 440 V 400 V 380...400 V 400...415 V 440 V 500 V 550 V 600 V Price Adder for: Special control voltages Available Control Voltages 12...500 V 50 Hz, 12...600 V 60 Hz, 12 ... 250 VDC No Surcharge > 20 pieces Extended operating limits 0.65...1.3 x Us Extended operating limits 0.7...1.25 x Us PQ = Package Quantity Product Selection - Page 4-10 4-34 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Accessories Renewal Parts: Coils and Supply Modules for Bulletin CAB6 Contactors Description Variations For Use with Cat. No. PQ AC control CAB6-105-COIL- CAB6-85...CAB6-140 Conventional CAB6-105-EI...CAB6-250-EI (24...28 V 50/60 Hz) CAB6-250-EI-COIL-05 CAB6-300-EI-COIL- Electronic CAB6-105-EI...CAB6-300-EI CAB6-420-EI-COIL- CAB6-420-EI DC control CAB6-105-COIL- CAB6-85...CAB6-140 Conventional Set: Coils and Supply Modules for CAB6 Contactors For replacement only Electronic 4 CAB6-105-EI...CAB6-300-EI CAB6-300-EI-COIL- 1 CAB6-420-EI CAB6-420-EI-COIL- Options Voltage suffix code Cat. No. Suffix e.g. 54 Description Voltage suffix code from table below Ordering Example CAB6-105-COIL-54 Voltage Suffix Codes for AC Control [V] CAB6-85...CAB6-140 50 Hz 60 Hz 50/60 Hz CAB6-105-EI...CAB6-250-EI 50/60 Hz CAB6-300-EI...CAB6-420-EI 50/60 Hz 24 05 -- -- 2428 05 -- 28 -- 05 -- 4365 08 08 48 08 -- -- 110130 10 10 55 -- 08 -- 208277 14 14 110 10 -- (48) 380400 16 16 127 -- 10 -- 220230 13 -- -- 230 -- -- 54 240 (15) -- (55) 260 -- 13 -- 277 -- (15) -- 380400 16 -- -- 415 (17) -- -- 440460 -- 16 -- 480 -- (17) -- Voltage Suffix Codes for DC Control CAB6-85...CAB6-140 DC CAB6-105-EI...CAB6-300-EI DC CAB6-420-EI DC [V] 24 66 2428 66 -- 48 (70) 4872 (70) (70) 110 76 90135 76 -- 220 (86) 110135 -- 76 170255 (86) -- 190255 -- (86) Price Adder for: Special control voltages Type CAB6-85...CAB6-140 Available Control Voltages 21...550 V 50 Hz, 24...575 V 60 Hz, 110...240 V 50/60 Hz, 24 ... 240 VDC No Surcharge > 25 pieces ( ) Control voltages in parentheses: No inventory 50/60 Hz coil only available for CAB6-85 and 105 Will be delivered only as set coil and supply module PQ = Package Quantity Product Selection - Page 4-10 Rockwell Automation 4-35 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications IEC Specifications 100-M 05 AC-1 Active Power Load, Switching of 3-phase Motors Ambient temperature 40 C Ie 500 V [A] 690 V [A] 1000 V [A] 230 V [kW] 240 V [kW] 400 V [kW] 415 V [kW] 500 V [kW] 690 V [kW] 1000 V [kW] Ambient temperature 60 C Ie 500 V [A] 690 V [A] 1000 V [A] 230 V [kW] 240 V [kW] 400 V [kW] 415 V [kW] 500 V [kW] 690 V [kW] 1000 V [kW] Switching of 3-phase Motors Ambient temperature 60 C AC-2, AC-3, AC-4 230 V [A] 240 V [A] 400 V [A] 415 V [A] 500 V [A] 690 V [A] 1000 V [A] 230 V [kW] 240 V [kW] 400 V [kW] 415 V [kW] 500 V [kW] 690 V [kW] 1000 V [kW] AC-4 at approximately 200 000 operations 230 V [A] 240 V [A] 400 / 415V [A] 500 V [A] 690 V [A] 1000 V [A] 230 V [kW] 240 V [kW] 400 V [kW] 415 V [kW] 500 V [kW] 690 V [kW] 1000 V [kW] Max. switching frequency Sch/h 09 12 09 12 100-C, 100S-C 16 23 30 37 4 20 -- -- 8 8.3 14 14 17 -- -- 16 -- -- 6.4 6.7 11 12 14 -- -- 20 -- -- 8 8.3 14 14 17 -- -- 16 -- -- 6.4 6.7 11 12 14 -- -- 20 -- -- 8 8.3 14 14 17 -- -- 16 -- -- 6.4 6.7 11 12 14 -- -- 32 32 -- 13 13 22 23 28 38 -- 32 32 -- 13 13 22 23 28 38 -- 32 32 -- 13 13 22 23 28 38 -- 32 32 -- 13 13 22 23 28 38 -- 32 32 -- 13 13 22 23 28 38 -- 32 32 -- 13 13 22 23 28 38 -- 32 (40) 32 (40) -- 13 13 22 23 28 38 -- 32 32 -- 13 13 22 23 28 38 -- 50 50 -- 20 21 35 36 43 60 -- 45 45 -- 18 19 31 32 39 54 -- 50 50 -- 20 21 35 36 43 60 -- 45 45 -- 18 19 31 32 39 54 -- 6.5 6.5 5.3 5.3 4 -- -- 1.5 1.5 2.2 2.2 2.2 -- -- 2.3 2.3 2 1.9 -- -- 0.37 0.37 0.75 0.75 0.75 -- -- 250 12 12 9 9 7 -- -- 3 3 4 4 4 -- -- 3.9 3.9 3.3 3.2 -- -- 0.75 0.75 1.1 1.1 1.5 -- -- 250 12 12 12 12 7 -- -- 3 3 5.5 5.5 4 -- -- 3.9 3.9 3.3 3.2 -- -- 0.75 0.75 1.1 1.1 1.5 -- -- 250 12 12 9 9 7 5 -- 3 3 4 4 4 4 -- 4.3 4.3 4.3 4.3 4.3 -- 0.75 0.75 1.8 1.8 2.2 3 -- 250 15 15 12 12 10 7 -- 4 4 5.5 5.5 5.5 5.5 -- 6.6 6.6 6.6 6.6 6.6 -- 1.5 1.5 3 3 3.7 5.5 -- 250 20 20 16 16 14 9 -- 5.5 5.5 7.5 7.5 7.5 7.5 -- 9 9 9 9 9 -- 2.2 2.2 4 4 5.5 7.5 -- 220 26.5 26.5 23 23 20 12 -- 7.5 7.5 11 11 13 10 -- 10 10 10 10 10 -- 2.2 2.2 4 4 5.5 7.5 -- 200 35 35 30 30 25 18 -- 10 10 15 15 15 15 -- 12 12 12 12 12 -- 3 3 5.5 5.5 7.5 10 -- 200 38 38 37 37 30 21 -- 11 11 18.5 20 20 18.5 -- 14 14 14 14 14 -- 3.7 4 6.3 6.3 7.5 11 -- 200 Values in ( ) with increased cross-section and cable lug Max. switching frequency Power ratings: Preferred values according to IEC 60072-1 Product Selection - Page 4-10 4-36 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-C, 100S-C 43 60 72 85 -85 -105(-EI) -140 -140-EI CAB6 -170-EI -210-EI -250-EI -300-EI -420-EI 85 85 -- 34 35 59 61 74 102 -- 63 63 -- 25 26 44 45 55 75 -- 100 100 -- 40 42 69 72 87 120 -- 100 100 -- 40 42 69 72 87 120 -- 100 100 -- 40 42 69 72 87 120 -- 100 100 -- 40 42 69 72 87 120 -- 100 100 -- 40 42 69 72 87 120 -- 100 100 -- 40 42 69 72 87 120 -- 160 160 160 64 67 111 115 139 191 277 135 .135 135 54 56 94 97 117 161 234 160 160 160 64 67 111 115 139 191 277 135 135 135 54 56 94 97 117 161 234 250 250 250 100 104 173 180 217 299 433 210 210 210 84 87 145 151 182 251 364 250 250 250 100 104 173 180 217 299 433 210 210 210 84 87 145 151 182 251 364 250 250 250 100 104 173 180 217 299 433 210 210 210 84 87 145 151 182 251 364 350 350 350 139 145 242 252 303 418 606 300 300 300 120 125 208 216 260 359 520 350 350 350 139 145 242 252 303 418 606 300 300 300 120 125 208 216 260 359 520 450 450 450 179 187 312 323 390 538 779 380 380 380 151 158 263 273 329 454 658 500 500 500 199 208 346 359 433 598 866 425 425 425 169 177 294 305 368 508 736 4 44 44 43 43 38 25 -- 13 13 22 22 25 22 -- 16.5 16.5 16.5 16.5 16.5 -- 4 4 7.5 7.5 10 15 -- 200 62 62 60 60 55 34 -- 18.5 18.5 32 32 37 32 -- 25.5 25.5 25.5 25.5 25.5 -- 6.3 7.5 13 13 15 22 -- 120 72 72 72 72 67 42 -- 22 22 40 40 45 40 -- 31 31 31 31 31 -- 7.5 7.5 15 17 20 25 -- 120 85 85 85 85 80 49 -- 25 25 45 45 55 45 -- 38 38 38 38 38 -- 11 11 20 20 25 32 -- 120 85 85 85 85 (95) 85 85 33 25 25 45 45 (55) 55 80 45 43 43 43 43 43 19 13 13 22 22 25 40 22 100 105 140 140 105 140 140 105 140 140 105 (130) 140 (155) 140 (155) 105 115 140 105 115 140 40 55 55 32 45 45 32 45 45 55 75 75 55 (75) 80 (90) 80 (90) 63 80 90 100 110 132 55 75 75 50 50 50 50 50 23 15 15 25 25 32 45 30 100 60 60 60 60 60 37 17 18.5 32 32 40 55 50 100 60 60 60 60 60 37 17 18.5 32 32 40 55 50 100 170 170 170 170 170 170 65 55 55 90 100 110 160 90 67 67 67 67 67 43 20 22 37 37 45 63 55 100 210 250 300 420 210 250 300 420 210 250 300 420 210 (227) 250 (258) 300 (315) 420 (425) 210 250 300 420 210 250 300 420 80 95 115 160 63 80 90 132 63 80 100 132 110 132 160 220 125 (132) 150 160 (185) 250 150 160 200 300 200 250 300 425 110 132 160 220 85 85 85 85 85 60 25 25 45 50 55 80 80 50 105 105 105 105 105 72 32 32 55 55 75 100 100 50 140 140 140 140 140 85 45 45 75 80 100 132 110 50 170 170 170 170 170 105 55 55 90 100 110 160 150 50 415 V: values in ( ) AC-3 and AC-4 lifespan -25 % Value applies only to AC-2 and AC-3; AC-4: 360 A Product Selection - Page 4-10 Rockwell Automation 4-37 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications IEC Specifications 100-M 05 Star-Delta Starting 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V Short-circuit Protection of Contactors without Motor Protection Relays Max. fuse gG per IEC 947-4-1 Type 1 Coordination Type 2 Coordination 400 V Type 2 Coordination 690 V [A] [A] [A] [A] [A] [A] [A] [kW] [kW] [kW] [kW] [kW] [kW] [kW] 11 11 9.2 9.2 6.9 -- -- 3 3 4 4 4 -- -- 21 21 16 16 12 -- -- 5.5 5.5 7.5 7.5 7.5 -- -- 21 21 21 21 12 -- -- 5.5 5.5 10 11 7.5 -- -- 21 21 16 16 12 8.6 -- 5.5 5.5 7.5 7.5 7.5 7.5 -- 26 26 21 21 17 12 -- 7.5 7.5 10 11 11 10 -- 35 35 28 28 24 16 -- 10 10 13 15 15 13 -- 46 46 40 40 35 21 -- 13 13 20 22 22 18.5 -- 61 61 52 52 43 31 -- 17 18.5 25 25 25 25 -- 66 66 64 64 52 36 -- 20 20 32 37 32 32 -- 09 12 09 12 100-C, 100S-C 16 23 30 37 4 max. [A] max. [A] max. [A] 25 16 -- 25 16 -- 25 16 -- 50 25 25 50 35 35 50 35 35 80 40 40 125 80 80 125 80 80 Power ratings: Preferred values according to IEC 60072-1 Product Selection - Page 4-10 4-38 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-C, 100S-C 43 76 76 74 74 66 43 -- 22 22 40 40 45 40 -- 60 107 107 104 104 95 59 -- 32 32 55 55 63 55 -- 72 125 125 125 125 116 73 -- 37 40 63 63 80 63 -- 85 147 147 147 147 139 85 -- 45 50 80 80 90 80 -- -85 -105(-EI) -140 -140-EI CAB6 -170-EI 294 294 294 294 294 294 112 90 100 160 160 200 300 160 -210-EI -250-EI -300-EI -420-EI 147 182 242 242 147 182 242 242 147 182 242 242 147 (164) 182 (225) 242 (268) 242 (268) 147 182 199 242 147 182 199 242 55 65 96 96 45 55 75 75 50 63 80 80 80 100 132 132 80 (90) 100 (132) 132 (160) 132 (160) 100 132 132 160 132 160 200 220 75 90 132 132 364 433 520 727 364 433 520 727 364 433 520 727 364 (393) 433 (447) 520 (546) 727 (736) 364 433 520 727 364 433 520 727 139 165 200 277 110 132 160 220 125 150 160 250 200 250 300 425 220 250 315 (335) 425 (450) 250 315 375 530 355 425 530 750 200 220 280 400 4 160 100 100 250 160 160 250 160 160 250 160 160 250 200 200 250 200 200 315 250 250 315 250 250 355 315 315 500 400 400 500 400 400 630 500 500 630 500 500 415V: Values in ( ) AC-3 lifespan -25 % Product Selection - Page 4-10 Rockwell Automation 4-39 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications IEC Specifications 100-M 05 Switching of Power Transformers, AC-6a Inrush current Rated transformer n = 30 =n [A] [A] [A] [A] [A] [A] [A] [kVA] [kVA] [kVA] [kVA] [kVA] [kVA] [kVA] [A] [A] 2.9 2.9 2.4 2.4 1.8 -- -- 1.2 1.2 1.7 1.7 1.6 -- -- -- -- 5.4 5.4 4.1 4.1 3.2 -- -- 2.2 2.2 2.8 2.9 2.7 -- -- -- -- 5.4 5.4 5.4 5.4 3.2 -- -- 2.2 2.2 3.7 3.9 2.7 -- -- -- -- 10.9 10.9 10.9 10.9 10.9 10.9 -- 4.3 4.5 7.5 7.8 9.4 13 -- 16.3 22 10.9 10.9 10.9 10.9 10.9 10.9 -- 4.3 4.5 7.5 7.8 9.4 13 -- 16.3 22 10.9 10.9 10.9 10.9 10.9 10.9 -- 4.3 4.5 7.5 7.8 9.4 13 -- 16.3 22 10.9 10.9 10.9 10.9 10.9 10.9 -- 4.3 4.5 7.5 7.8 9.4 13 -- 16.3 22 20 20 20 20 20 20 -- 8 8.3 14 14 17 24 -- 30 40 20 20 20 20 20 20 -- 8 8.3 14 14 17 24 -- 30 40 09 12 09 12 100-C, 100S-C 16 23 30 37 4 230 V 240 V 400 V 415 V 500 V 690 V 1000 V 230 V 240 V 400 V 415 V 500 V 690 V 1000 V n = 20 690 V n = 15 690 V Switching of 3-phase Capacitors, AC-6b Inductance of leads between capacitors in parallel: min. 6 H (100-C09...-C30 contactors: min. 30 H) Single capacitors 40 C 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V 60 C 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V Group capacitors 40 C 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V 60 C 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] [kVar] -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 8 8 8 8 8 8 -- 8 8 8 8 8 8 -- 8.5 8.5 10 10 10 10 -- 9 9 12.5 12.5 12.5 12.5 -- 14 14 20 20 20 20 -- 14 14 24 25 25 25 -- 8 8 8 8 8 8 -- 8 8 8 8 8 8 -- 8.5 8.5 10 10 10 10 -- 9 9 12.5 12.5 12.5 12.5 -- 12.5 12.5 20 20 20 20 -- 12.5 12.5 21.5 22 25 25 -- 5 5 5 5 5 5 -- 5 5 5 5 5 5 -- 8 8 8 8 8 8 -- 9 9 10 10 10 10 -- 12.5 12.5 15 15 15 15 -- 14 14 20 20 20 20 -- 5 5 5 5 5 5 -- 5 5 5 5 5 5 -- 8 8 8 8 8 8 -- 9 9 10 10 10 10 -- 12.5 12.5 15 15 15 15 -- 12.5 12.5 20 20 20 20 -- Product Selection - Page 4-10 4-40 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-C, 100S-C 43 60 72 85 -85 -105(-EI) -140(-EI) -170-EI CAB6 -210-EI -250-EI -300-EI -420-EI 23 23 23 23 23 23 -- 9.2 10 16 17 20 27 -- 34.5 46 40.8 40.8 40.8 40.8 40.8 40.8 -- 16 17 28 29 35 49 -- 61.3 82 40.8 40.8 40.8 40.8 40.8 40.8 -- 16 17 28 29 35 49 -- 61.3 82 40.8 40.8 40.8 40.8 40.8 40.8 -- 16 17 28 29 35 49 -- 61.3 82 53 53 53 53 53 53 53 21 22 37 38 46 64 92 80 107 60 60 60 60 60 60 60 24 25 42 43 52 72 104 90 120 70 70 70 70 70 70 70 28 29 48 50 61 84 121 105 140 85 85 85 85 85 85 85 34 35 59 61 74 102 147 128 170 105 105 105 105 105 105 105 42 44 73 75 91 125 182 158 210 125 125 125 125 125 125 125 50 52 87 90 108 149 217 188 250 150 150 150 150 150 150 150 60 62 104 108 130 179 260 225 300 210 210 210 210 210 210 210 84 87 145 151 182 251 364 315 420 4 24 25 35 35 35 35 -- 28 29 48 50 50 50 -- 28 29 48 50 55 55 -- 28 29 48 50 60 60 -- 18 18 30 30 30 30 -- 28 29 42 42 42 42 -- 28 29 48 50 50 50 -- 28 29 48 50 55 55 -- 20 20 25 25 25 25 -- 28 29 40 40 40 40 -- 28 29 48 50 50 50 -- 28 29 48 50 50 50 -- 18 18 25 25 25 25 -- 28 29 40 40 40 40 -- 28 29 48 50 50 50 -- 28 29 48 50 50 50 -- 45 48 78 80 98 133 193 33 35 58 60 73 100 145 45 47 58 60 60 60 60 33 35 58 60 60 60 60 45 48 78 80 98 133 193 33 35 58 60 73 100 145 40 45 75 78 78 78 80 35 38 58 60 73 78 80 70 73 120 125 150 208 300 60 63 100 105 128 175 253 70 73 98 98 100 100 100 58 60 98 98 100 100 100 70 73 120 125 150 208 300 60 63 100 105 128 175 253 70 73 120 123 123 123 125 58 60 100 105 123 123 125 98 102 170 176 212 293 424 84 87 145 151 182 251 364 98 102 170 170 172 174 177 84 87 145 151 172 174 177 98 102 170 176 212 293 424 84 87 145 151 182 251 364 98 102 170 176 212 247 251 84 87 145 151 182 247 251 125 131 218 226 273 376 546 106 111 184 191 230 318 461 125 131 218 226 273 356 361 106 111 184 191 230 318 361 139 145 242 252 303 418 606 119 124 206 214 258 356 515 139 145 242 252 303 418 606 119 124 206 214 258 356 515 Product Selection - Page 4-10 Rockwell Automation 4-41 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications IEC Specifications 100-M 05 Switching of Lamps Gas discharge lamps AC-5a Individually compensated: Max. capacitance at expected Short-circuit current of open closed [A] [A] 18 14.5 09 18 14.5 12 18 14.5 09 22.5 22.5 12 25 25 100-C, 100S-C 16 28 28 23 29 29 30 40.5 37 37 45 41 4 10 kA [F] 20 kA [F] 50 kA [F] Filament AC-5b 230/240 V [A] Switching of Low Inductive Loads in Home Appliances and Similar Applications AC-7a 230 V [A] 400 V [A] 440 V [A] Switching of Motor Load for Home Appliances AC-7b 230 V [A] 400 V [A] 440 V [A] Switching of Hermetically Sealed Cooling Compressor Motors - manual reset of overload release AC-8a 400 V [A] 500 V [A] 690 V [A] - automatic reset of overload release AC-8b 400 V [A] 500 V [A] 690 V [A] Switching of DC Loads non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 C 1 pole 24 V [A] 48/60 V [A] 110 V [A] 220 V [A] 440 V [A] 2 poles in series 24 V [A] 48/60 V [A] 110 V [A] 220 V [A] 440 V [A] 3 poles in series 24 V [A] 48/60 V [A] 110 V [A] 220 V [A] 440 V [A] Shunt-wound Motors Starting, reverse current braking, reversing stepping DC-3, 60 C 3 poles in series 24 V [A] 48/60 V [A] 110 V [A] 220 V [A] 440 V [A] Series-wound Motors Starting, reverse current braking, reversing stepping DC-5, 60 C 3 poles in series 24 V [A] 48/60 V [A] 110 V [A] 220 V [A] 440 V [A] Short Time Withstand ICW, 60 C 10 s [A] 750 400 -- 9.3 750 400 -- 9.3 750 400 -- 9.3 1 000 500 200 12 1 000 500 200 16 1 000 500 200 18 1 000 500 200 22 2 700 1 350 540 30 2 700 1 350 540 37 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 32 32 32 10.5 9 7.5 32 32 32 14 12 10 32 32 32 19 16 13.5 32 32 32 23 20 18 45 45 45 30 30 27 45 45 45 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 12 12 8 5.5 5.5 5.5 16 16 10 7 7 7 22 22 14 9.3 9.3 9.3 32 32 20 12 12 12 38 38 28 13 13 13 45 45 35 14 14 14 6 4/1 0.6 0.2 0.08 6 6 4 0.8 0.2 6 6 6 3 0.4 9 6/1.5 1 0.3 0.1 9 8 6 1.2 0.3 9 9 9 4 0.6 9 6/1.5 1 0.3 0.1 9 8 6 1.2 0.3 9 9 9 4 0.6 25 20 6 1.5 0.4 25 25 25 8 1 25 25 25 25 3 25 20 6 1.5 0.4 25 25 25 8 1 25 25 25 25 3 32 20 6 1.5 0.4 32 32 32 8 1 32 32 32 32 3 32 20 6 1.5 0.4 32 32 32 10 1 32 32 32 32 3 45 25 8 1.5 0.4 45 45 45 10 1 45 45 45 45 3.5 45 25 8 1.5 0.4 45 45 45 10 1 45 45 45 45 3.5 5 4 2 0.8 0.15 9 6 3 1.2 0.2 9 6 3 1.2 0.2 25 25 20 6 0.6 25 25 20 6 0.6 32 32 25 6 0.6 32 32 25 10 0.6 45 45 30 15 0.6 45 45 30 15 0.6 5 2 0.6 0.1 -- 60 9 3 1 0.1 -- 96 9 3 1 0.1 -- 96 25 25 20 6 0.6 170 25 25 20 6 0.6 170 32 32 25 6 0.6 170 32 32 25 10 0.6 215 45 45 30 15 0.6 300 45 45 30 15 0.6 304 Product Selection - Page 4-10 4-42 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-C, 100S-C 43 77 57 60 81 77 72 85 81 85 90 90 -85 144 121.5 -105(-EI) 144 121.5 -140(-EI) 225 189 -170-EI 225 189 CAB6 -210-EI 315 270 -250-EI 315 270 -300-EI 405 342 -420-EI 420 382.5 3 200 1 600 640 43 4 000 2 000 800 60 4 000 2 000 800 70 4 700 2 350 940 76 -- -- -- 107 -- -- -- 120 -- -- -- 140 -- -- -- 170 -- -- -- 273 -- -- -- 273 -- -- -- 300 -- -- -- 420 4 63 63 63 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 63 63 42 16 16 16 72 72 56 24 24 24 85 85 67 30 30 30 100 100 80 35 35 35 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50 30 9 1.5 0.5 50 50 50 10 1 63 63 63 50 4 70 40 11 2 0.5 70 70 70 15 1.5 90 90 90 70 5 80 40 11 2 0.5 80 80 80 15 1.5 90 90 90 80 5 80 40 11 2 0.5 80 80 80 15 1.5 100 100 100 80 5 120 120 120 3 0.6 120 120 120 120 3 120 120 120 120 11 120 120 120 3 0.6 120 120 120 120 3 120 120 120 120 11 210 210 210 4 1 210 210 210 210 4 210 210 210 210 11 210 210 210 4 1 210 210 210 210 4 210 210 210 210 11 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 63 50 35 20 0.6 90 70 70 25 0.6 90 70 70 25 0.6 100 80 80 30 0.6 120 120 120 120 3 120 120 120 120 3 210 210 210 210 4 210 210 210 210 4 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 63 50 35 20 0.6 375 90 70 70 25 0.6 700 90 70 70 25 0.6 700 100 80 80 30 0.6 700 80 80 80 80 1.2 1060 80 80 80 80 1.2 1060 120 120 120 120 2 1 390 120 120 120 120 2 1 390 -- -- -- -- -- 2 300 -- -- -- -- -- 2 570 -- -- -- -- -- 2 800 -- -- -- -- -- 4 290 Product Selection - Page 4-10 Rockwell Automation 4-43 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Specifications 100-M 05 Resistance and Power Dissipation Main current circuit resistance [m] Power dissipation by all circuits [W] at Ie AC-3/400 V Total power dissipation AC control [W] at Ie AC-3/400 V DC control [W] Load Carrying Capacity per UL/CSA Lloyd's Register of Shipping Continuous current (open) [A] (enclosed) [A] Rated power 3-phase motors, 60 Hz, enclosed (Direct-on-line) 1-phase 115 V [HP] 230 V [HP] 3-phase 200 V [HP] 230 V [HP] 460 V [HP] 575 V [HP] (Reversing combinations) 3-phase 200 V [HP] 230 V [HP] 460 V [HP] 575 V [HP] Lifespan Mechanical AC control [Mio. operations. DC control [Mio. operations] Electrical AC-3 (400 V) [Mio. operations] Weight AC control [kg] DC control [kg] 5.5 0.46 1.9 3.0 09 5.5 1.3 2.7 3.8 12 5.5 2.4 3.8 4.9 09 2.7 0.66 3.3 6.7 12 2.7 1.2 3.8 7.2 100-C, 100S-C 16 2.7 2.1 4.7 8.1 23 2 3.2 6.2 12.4 30 2 5.4 8.4 14.6 37 2 8.2 11.2 17.4 4 12 12 12 12 12 12 25 25 25 25 30 30 30 30 45 45 50 50 0.5 1 1.5 1.5 3 3 1.5 1.5 3 3 10 20 0.7 0.16 0.16 0.5 1.5 2 2 5 5 2 2 5 5 10 20 0.7 0.16 0.16 0.5 2 3 3 7.5 10 3 3 7.5 10 10 20 0.7 0.16 0.16 0.5 1.5 2 2 5 7.5 2 2 5 7.5 13 13 1.3 0.39 0.6 0.5 2 3 3 7.5 10 3 3 7.5 10 13 13 1.3 0.39 0.6 1 3 5 5 10 15 5 5 10 15 13 13 1.3 0.39 0.61 2 3 5 7.5 15 15 5 7.5 15 15 13 13 1.3 0.39 0.73 2 5 7.5 10 20 25 7.5 10 20 25 13 13 1.3 0.48 0.85 3 5 10 10 25 30 10 10 25 30 13 13 1.3 0.49 0.85 Product Selection - Page 4-10 4-44 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-C, 100S-C 43 1.5 8.3 11.5 18.4 60 0.9 9.7 11 11 72 0.9 14 13.8 13.8 85 0.9 19.5 17.5 17.5 -85 0.4 8.7 18.2 16.7 -105(-EI) 0.4 13.2 (13.8) 22.7 20.9 -140(-EI) 0.42 24.6 34.5 32.5 -170-EI 0.42 36.3 46.5 44.5 CAB6 -210-EI 0.22 29.4 39.4 37.4 -250-EI 0.22 41.7 51.7 49.7 -300-EI 0.18 48.6 58.6 56.6 -420-EI 0.15 79.5 89.5 87.5 4 63 63 90 90 90 90 100 100 178 160 178 160 250 220 250 220 350 300 350 300 420 340 500 420 3 7.5 10 15 30 30 10 15 30 30 12 13 1 0.51 1.0 5 10 15 20 40 50 15 20 40 50 10 10 1 1.45 1.47 5 15 20 25 50 60 20 25 50 60 10 10 1 1.45 1.47 7.5 15 25 30 60 60 25 30 60 60 10 10 1 1.45 1.47 7.5 15 25 30 60 75 25 30 60 75 10 10 1 3.3 3.3 10 25 40 40 75 100 40 40 75 100 10 10 1 3.3 (3.8) 3.3 (3.8) 15 30 40 50 100 125 40 50 100 125 10 10 1 3.3 (3.8) 3.3 (3.8) -- 40 50 60 150 150 50 60 150 150 10 10 1 3.8 3.8 -- 50 60 75 150 200 60 75 150 200 10 10 1 7.5 7.5 -- -- 75 100 200 250 75 100 200 250 10 10 1 7.5 7.5 -- -- 100 125 250 300 100 125 250 300 10 10 1 7.5 7.5 -- -- 150 175 350 400 117 135 278 350 10 10 1 7.5 7.5 Product Selection - Page 4-10 Rockwell Automation 4-45 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-M 05 Terminal Cross Sections - Main Contacts Terminal type 1. conductor 2. conductors 1. conductor[ 2. conductors c s b c s b 100-C, 100S-C 12 09 12 16 1...4 1...4 1.5 ... 6 1.5 ... 6 -- -- -- -- 1 ... 2.5 16 ... 10 -- 8.9 ... 22 2.5 ... 10 2.5 ... 10 2.5 ... 16 2.5 ... 16 -- -- -- -- 1.5 ... 3.5 14 ... 6 -- 13 ... 31 23 30 37 09 4 c s b [mm2] [mm2] [mm2] [mm2] [mm] [mm] [mm] [mm] 0.75 ... 2.5 0.75 ... 2.5 0.75 ... 2.5 0.75 ... 2.5 -- -- -- -- b max. c max. s max. o min. Recommended torque Cross section per UL/CSA With terminal lug kit Recommended torque With Frame Terminal Block [Nm] [AWG] [lb-in] 1. conductor [mm2] 2. conductors [mm2] 1. conductor 2. conductors b max. s top s bottom top bottom [mm2] [mm2] [mm] [mm] [mm] [AWG] [AWG] [lb-in] 1 ... 1.5 18 ... 14 -- 7 ... 15 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- s b b s Recommended torque[Nm] Cross section per UL/CSA Recommended torque Control Circuits 100-M 05 Operating limits 50 Hz, 60 Hz, 50/60 Hz DC control Pick-up and Holding Power 50 Hz, 60 Hz, 50/60 Hz DC control Switching Delay AC pick-up dropout pick-up dropout pick-up holding pick-up holding [x Us] [x Us] [x Us] [x Us] [VA/W] [VA/W] [W] [W] [ms] [ms] [ms] [ms] [ms] [ms] [ms] 09 0.85...1.1 0.35...0.65 0.85...1.1 0.1...0.25 22/20 4/1.4 2.5 2.5 15...40 15...25 15...25 18...40 6...12 8...12 35...50 70/50 8/2.6 6.5 6.5 15...30 10...60 10...60 40...70 7...15 14...20 70...95 12 09 12 100-C, 100S-C 16 0.85...1.1 0.3...0.6 0.8...1.1 0.1...0.6 70/50 9/3 9.2 9.2 15...30 10...60 10...60 40...70 7...15 17...23 80...125 80/60 9/3 9.2 9.2 15...30 10...60 10...60 50...80 7...15 17...23 80...125 23 30 37 closing delay opening delay With RC module opening delay DC closing delay opening delay Integrated protection circuitopening delay With diode opening delay Pozidriv No. 2 / Blade No. 3 screw Pozidriv No. 2 / Blade No. 4 screw Hexagonal socket screw Hexagonal screw Product Selection - Page 4-10 4-46 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications 100-C, 100S-C 43 60 72 85 -85 -105 -105-EI -140(-EI) CAB6 -170-EI -210-EI -250-EI -300-EI -420-EI 2.5 ... 16 2.5 ... 10 2.5 ... 25 2.5 ... 15 2.5 ... 35 2.5 ... 25 2.5 ... 50 2.5 ... 35 -- -- -- -- -- 20 10 2x5 6.1 8...10 6...2/0 CAB6-105-HU 70...90 CAB6-HB1 16 ... 35 16 ... 70 16 ... 50 16 ... 95 16 3...9 3 ... 12 8 ... 10 No. 6 ... 1 / 0 AWG No. 6 ... 3 / 0 AWG 70 ... 90 -- -- -- -- 25 12.5 2x5 8.3 10...12 6...250 MCM CAB6-170-HU 90...110 CAB6-HB2 16 ... 35 16 ... 95 16 ... 50 16 ... 120 20 3...9 3 ... 14 10 ... 12 No. 6 ... 1 / 0 AWG No. 6 AWG ... 250 MCM 90 ... 110 -- -- -- -- 30 15 2x6 10.5 16 8...600 MCM 825-ML630 / CA 6-420-HU 130...150 CAB6-HB3 25 ... 240 25 ... 240 25 ... 300 25 ... 300 25 4 ... 20 4 ... 20 20 ... 25 No. 4 AWG ... 600 MCM No. 4 AWG ... 600 MCM 180 ... 220 4 -- -- -- 1.5 ... 3.5 14 ... 6 -- 13 ... 31 -- -- -- 2...6 14 ... 2 -- 18 ... 52 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100-C, 100S-C 43 60 0.85 ....1.1 0.3 ...0.6 0.8 ...1.1 0.1 ...0.6 130/90 10/3.2 10.1 10.1 15...30 10...60 10...60 50...80 7...15 17...23 80...125 200/110 16/4.5 200 4.5 20...40 10...60 10...60 20...40 -- 220 V 20...35 > 220 V 80...125 72 85 -85 -105/-140 -105-EI -140-EI CAB6 -170-EI -210-EI 0.85 ...1.1 0.3 ...0.5 0.85 ...1.1 0.3 ...0.5 370/243 12/6 190 6 75...90 30...60 -- 75...90 30...60 -- -- 590/355 15/7 375 7 75...90 30...60 -- 75...90 30...60 -- -- -250-EI -300-EI -420-EI 0.85 ...1.1 0.3 ...0.6 0.85 ...1.1 0.3 ...0.6 650/310 50/10 540 8 20...47 6...12 9...18 27...47 12...20 12...20 -- With CT(A)B6-150 / 200 min. 25 mm2 CAB6-HB3 not for use with CEFB1-41 / 42 and 825-MCM630 in preparation 25 ... 95 mm2 with sleeve per DIN 46228 Electronic coil drives are controlled for minimizing performance, but this control may shortly require (< 1ms) peak load when attracting.This must be taken into account for the dimensioning of supply devices, all-or-nothing relays and cross-sections of coil supply lines. Please contact your nearest Rockwell Automation sales office for detailed information Product Selection - Page 4-10 Rockwell Automation 4-47 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Auxiliary Contacts and Auxiliary Contact Blocks Auxiliary contact for 100-M Internal Switching of AC Loads AC-12 Ith AC-15 at rated voltage of at 40 C at 60 C 24 V 42 / 48 V 110 V 230 V 240 V 400 V 415 V 500 V 690 V Blocks Auxiliary contact for 100-C, 100S-C Internal Front-mounted Side-mounted Auxiliary contact for CAB6 Conventional Electronically compatible 0.1 at 250 V [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] 16 12 -- -- -- 6 5 2.5 2 1.25 -- 10 6 -- -- -- 2 2 1 1 0.6 -- 25 20 10 10 10 10 10 6 5 2.5 1 10 6 6 6 6 5.5 5 3 2.5 1.6 1 10 6 3 3 3 3 3 2 2 1.6 0.75 16 12 -- -- -- 5.5 5 3 2.5 1.6 1 4 (1 ... 100 mA) at 3 ... 125 V Switching of DC Loads DC-12 L/R< 1 ms resistive loads at 24 VDC [A] 48 VDC [A] 110 VDC [A] 220 VDC [A] 440 VDC [A] DC-14 L/R< 15 ms inductive loads with economy resistor in series at 24 VDC [A] 48 VDC [A] 110 VDC [A] 220 VDC [A] 440 VDC [A] DC-13 switching electromagnets at 24 VDC [A] 48 VDC [A] 110 VDC [A] 220 VDC [A] 440 VDC [A] Fuse gG Short-circuit protection with no Welding of contacts per IEC 947-5 [A] [A] Safe isolation 6 4 0.6 0.2 0.08 6 2 0.6 0.2 0.08 12 9 3.5 0.55 0.2 12 9 3.5 0.55 0.2 6 3.2 0.45 0.18 0.1 16 9 3.5 0.55 0.2 -- -- -- -- -- 4 2.5 0.4 0.12 0.05 5 0.6 0.45 0.25 0.04 4 1.2 0.4 0.12 0.05 2 0.6 0.45 0.1 0.04 9 5 2 0.4 0.16 5 2 0.7 0.25 0.12 9 5 2 0.4 0.16 5 2 0.7 0.25 0.12 2 1.6 .3 0.12 0.05 3 1.5 0.6 0.3 0.2 9 5 2 0.4 0.16 5 2 0.7 0.25 0.12 -- -- -- -- -- (1 ... 100 mA) at 3 ... 125 V 16 16 10 10 10 10 between load and auxiliary circuit 250 V 10 10 10 10 16 16 -- -- between load and auxiliary circuit 500 V 5 max. 600 5 5 max. 600 10 General purpose Heavy pilot duty (A 600) max. 600 Standard pilot duty (P 600) 1 max. 250 0.1 0.1 max. 250 0.1 Min. Short-circuit switching capacity 17 V DIN 19240 Auxiliary contacts [mA] Load Carrying Capacity per UL/CSA Rated voltage AC [V] Continuous rating Switching capacity Rated voltage Switching capacity 40 C AC DC [A] [A] [V] [A] 5 max. 600 5 5 10 General purpose Heavy pilot duty (A 600) max. 600 Light pilot duty (Q 600) 10 10 A 600 max. 600 10 P 600 Q 600 Only with CAB6-P2-B11 and CAB6-P3-B11 Product Selection - Page 4-10 4-48 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications General 100-M 05 ... 09 Rated Isolation Voltage Ui IEC, AS, BS, SEV, VDE 0660 per UL, NEMA, CSA, EEMAC Rated Impulse Voltage Withstand Uimp Rated Voltage Ue AC 50/60 Hz DC Insulation Class of the Coil Rated coil frequency Ambient Temperature Storage Operation at rated voltage at 70 C Climatic Withstand Max. Altitude of Installation Site Protection Class Single contactor cover Contactor with frame terminal block Auxiliary contact Protection against Accidental Contact Resistance to Shock Resistance to Vibration Positively Guided Contacts per SUVA [V] [V] [kV] 500 600 8 230, 240, 400, 415, 500 24, 48, 110, 220, 440 Class B per IEC 85 AC 50/60 Hz, DC [C] [C] -55 ... +80 -25 ... +60 690 600 8 115, 230, 400, 500, 690 24, 48, 110, 220, 440 Class F per IEC 85 AC 50/60 Hz, DC -55 ...+80 -25 ...+60 15 % current reduction against 60 C values IEC 68-2 2000 NN, per IEC 947-4 IP2X (in connected state) 1000 600 12 230, 240, 400, 415, 500, 690, 1000 24, 48, 110, 220, 440 Class B per VDE 0660, Table 22 AC 50 Hz, 50/60 Hz, DC -40 ...+80 -25 ...+60 IEC 68-2 2000 NN, per IEC 947-4 IP00 IEC 529 / DIN 40 050 IP10 IEC 529 / DIN 40 050 IP20 IEC 529 / DIN 40 050 IP20 IEC 529 / DIN 40 050 Finger and back-of-hand proof per VDE 0106, part 100 IEC 68-2 IEC 68-2 12 100-C, 100S-C 09 ... 85 CAB6 -85 ... 420-EI [V] [V] 4 [m] Standards Approvals IEC 68-2 2000 NN, per IEC 947-4 IP2X -- -- -- Finger and back-of-hand proof per VDE 0106, part 100 IEC 68-2 IEC 68-2 Contactor contacts among each other. Auxiliary contact block contacts next to each other. But not between contactor and auxiliary contact block. IEC 60947; EN 60947; UL 508; CSA 22.2. No. 14 CE, UL Listed, CSA, Germanischer Lloyd, Bureau CE, Veritas, Lloyd's Register of UL Listed, Shipping, CSA, Maritime Register of Shipping Finger and back-of-hand proof per VDE 0106, part 100 IEC 68-2 IEC 68-2 Restricted guidance guarantees without restrictions from contactor to auxiliary contact and auxiliary contact to contactor. No restricted guidance 100-FL, 100-FPT IEC 60947; EN 60947; UL 508; CSA 22.2. No. 14 CE, UL Listed, CSA, RINA, Bureau Veritas, Maritime Register of Shipping, American Bureau of Shipping, Germanischer Lloyd, Lloyd's Register of Shipping, Wershe Veritas in preparation -- IEC 60947; EN 60947; UL 508; CSA 22.2. No. 14 CE, UL Listed, CSA Product Selection - Page 4-10 Rockwell Automation 4-49 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Heavy Duty Starting and Regular Short-time Operation 100-C09/12/16 100-C23 100-C30/37 100-C60/72/85 CAB6-85 CAB6-105(-EI) CAB6-140(-EI) CAB6-170-EI CAB6-210-EI CAB6-250-EI CAB6-300-EI CAB6-420-EI 1000 Bulletin 100-C, CAB6 Contactors 100 4 max. Starting time / Loading time [s] 10 1 10 100 10000 Starting current / Short-time current [A] Electrical Life Bulletin 100-M, 100-C, 100S-C, CAB6 Contactors L1 L2 L3 N PE L1 UC US L1 UC US 21 S0 22 0 A1 K1 A2 12 3 S1 100-C43 13 K1 14 13 S1 13 K1 14 1 13 14 24 6 14 0/1 A2 A2 T1 T2 T3 M1 3 AC N (L2) K1 A1 H1 N (L2) K1 A1 H1 Continuous contact control Impulse contact control Utilisation categories Switching conditions for verifying electrical life (number of operations under load) per IEC 947-4; -5. Test conditions AC-1 AC-2 AC-3 AC-4 AC-15 Resistance furnaces: Non-inductive or slightly inductive loads Slip-ring motors: Starting and reversing Squirrel-cage motors: Starting and stopping of running motors Squirrel-cage motors: Starting, reversing, stepping Solenoids: for contactors, valves, and lifting magnets Making I/Ie 1 2.5 Ie 17 A Ie > 17 A Ie 17 A Ie > 17 A 6 6 6 6 10 Ur Recovery voltage I Making current U/Ue 1 1 1 1 1 1 1 cos 0.95 0.65 0.65 0.35 0.65 0.35 0.7 Ic U Ic/Ie 1 2.5 1 1 6 6 1 Breaking Ur/Ue 1 1 0.17 0.17 1 1 1 cos 0.95 0.65 0.65 0.35 0.65 0.35 0.4 Ie Rated operating current Ue Rated operating voltage Breaking current Off-load voltage The following values are valid for the operating conditions defined in IEC 947-4 and utilisation categories AC-1...AC-4 at 400V, 50/60 Hz. Product Selection - Page 4-10 4-50 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Electrical Life 100-M Electrical Life; Ue = 400 / 415 VAC AC-3 Switching of squirrel-cage motors while starting AC-1 Non- or slightly inductive loads, resistance furnaces 10 4 Contact life [millions of operations] 1 100-M12 100-M09 0.1 100-M05 (AC-1) 0.01 1 10 100 Rated operating current Ie AC-2 [A] (Dashed curves - - - - AC-1 only, open) 100-M Electrical Life; Ue = 400 / 415 VAC AC-4 Stepping of squirrel-cage motors 10 100-M09; 100-M12 100-M05 Contact life [millions of operations] 1 0.1 0.01 0.1 1 10 Rated operating current Ie [A] Product Selection - Page 4-10 Rockwell Automation 4-51 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Electrical Life 100-C AC-1 40 C Non- or slightly inductive loads, resistance furnaces; Ue = 230...690 V C09 C12 C16 C30 C37 C43 C60 C72 C23 C85 10 4 Contact life [millions of operations] 1 0.1 1 10 100 Rated operating current Ie AC-1 [A] 100-C AC-2 Stepping of slip-ring motors; Ue = 230...400...460 V C30 C37 C43 C60 C16 C23 C72 C85 10 10 C12 Contact life [millions of operations] C09 1 0.1 1 100 Rated operating current Ie AC-2 [A] Product Selection - Page 4-10 4-52 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Electrical Life 100-C AC-3 Switching of squirrel-cage motors while starting; Ue = 230...400...460 V C09 C12 C16 C23 C30 C37 C43 C60 C72 10 C85 4 Contact life [millions of operations] 1 0.1 1 10 100 Rated operating current Ie AC-3 [A] 100-C AC-3 Switching of squirrel-cage motors while starting; Ue = 500...575 V C37 C43 C12 C09 C16 C30 C60 C72 10 C23 C85 Contact life [millions of operations] 1 0.1 1 10 100 Rated operating current Ie AC-3 [A] Product Selection - Page 4-10 Rockwell Automation 4-53 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Electrical Life 100-C AC-3 Switching of squirrel-cage motors while starting; Ue = 690 V C37 C43 C09 C12 C16 C23 C30 C60 C72 C85 10 4 Contact life [millions of operations] 1 0.1 1 10 100 Rated operating current Ie AC-3 [A] 100-C AC-4 Stepping of squirrel-cage motors; Ue = 230...690 V 10 Contact life [millions of operations] 1 C12 C23 C30 C37 C43 C60 0.1 1 10 100 C09 Rated operating current Ie AC-4 [A] Product Selection - Page 4-10 4-54 C16 C72 C85 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Electrical Life 100-C AC-3 90 % & AC-4 10 % Mixed operation of squirrel-cage motors; Ue = 230...400...460 V C37 C60 C12 C16 C23 C30 C43 C72 C85 10 C09 4 Contact life [millions of operations] 1 0.1 1 10 100 Rated operating current Ie AC-3 / AC-4 [A] CAB6 AC-3 Switching of squirrel-cage motors while starting AC-1 Non- or slightly inductive loads, resistance furnaces; Ue = 400 V -105-(EI) -140-(EI) -170-EI -210-EI -250-EI -300-EI -420-EI (AC-1) 0.1 10 100 1000 10 Contact life [millions of operations] 1 -85 Rated operating current Ie AC-3 [A] (Dashed curves ------ AC-1 only, open) Product Selection - Page 4-10 Rockwell Automation 4-55 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Electrical Life CAB6 AC-4 Stepping of squirrel-cage motors; Ue = 400 V -85 -105-(EI) -140-(EI) -170-EI -210-EI -250-EI -300-EI -420-EI 10 4 Contact life [millions of operations] 1 0.1 0.01 1 10 100 1000 Rated operating current Ie AC-4 [A] CAB6 AC-3 90 % & AC-4 10 % Mixed operation of squirrel-cage motors; Ue = 400 V -105-(EI) -140-(EI) -170-EI -210-EI -250-EI -300-EI -420-EI 100 10 Contact life [millions of operations] 1 0.1 10 1000 -85 Rated operating current Ie AC-3 / AC-4 [A] Product Selection - Page 4-10 4-56 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Permissible Switching Rate 100-C AC-1 40 C Non- or slightly inductive loads, resistance furnaces; Ue = 230...690 V 3000 C09/C12/C16/C23 2500 Permissible switching rate [ops/h] 2000 C30/C37 C43 4 1500 C60/C72/C85 1000 500 0 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] 100-C AC-2 Stepping of slip-ring motors; Ue = 230...460 V 10000 Permissible switching rate [ops/h] 1000 C09/C12/C16 C23/C30/C37/C43 C60 C72 C85 100 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] Product Selection - Page 4-10 Rockwell Automation 4-57 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Permissible Switching Rate 100-C AC-3 Switching of squirrel-cage motors while starting; Ue = 230...460 V Relative operating time 40 %, Starting time tA = 0.25 s 10000 4 Permissible switching rate [ops/h] 1000 C09/C12/C16 C23/C30/C37/C43 C60/C72/C85 100 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] 100-C AC-4 Stepping of squirrel-cage motors; Ue = 230...460 V Starting time tA = 0.25 s 1000 Permissible switching rate [ops/h] 100 C09 C12 C16 C23/C30 C37/C43/C60 C72 C85 10 0 10 20 30 40 50 60 70 80 90 100 P/Pn [%] Product Selection - Page 4-10 4-58 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Permissible Switching Rate CAB6 AC-3 Switching of squirrel-cage motors while starting Relative operating time 40 %, Starting time tA = 0.25 s 10000 4 Permissible switching rate [ops/h] 1000 -105(-EI) -140(-EI) 100 10 10 100 -170-EI -85 1000 Rated operating current Ie [A] CAB6 AC-3 Switching of squirrel-cage motors while starting Relative operating time 40 %, Starting time tA = 1 s 10000 -85 -105-(EI) 1000 100 10 10 Permissible switching rate [ops/h] -140-(EI) -170-EI 100 1000 Rated operating current Ie [A] Product Selection - Page 4-10 Rockwell Automation 4-59 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Specifications Permissible Switching Rate CAB6 AC-2, AC-4 Stepping of motors Starting time tA = 0.25 s 10000 4 short time Permissible switching rate [ops/h] 1000 CAB6-85, CAB6-105(-EI) CAB6-140(-EI), CAB6-170(-EI) 100 10 10 100 Starting current IA [A] 1000 10000 CAB6 AC-2, AC-4 Stepping of motors Starting time tA = 1 s 10000 Permissible switching rate [ops/h] 1000 CAB6-85, CAB6-105(-EI) 100 CAB6-140(-EI), CAB6-170(-EI) short time 10 10 100 Starting current IA [A] 1000 10000 Product Selection - Page 4-10 4-60 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Dimensions Bulletin 100-M Dimensions in millimetres c2 c1 d2 od c Mounting Position 23 23 90 90 4 d1 b1 b a a1 Type 100-M a 45 a1 67 b 56 b1 47 c 48 c1 74 c2 77 od 4 d1 50 d2 40 Contactor with ... Mechanical interlock Auxiliary contact block Timer Neutral terminal Suppressor module Label holder [mm] a+a c1 c2 a1 a+20 c2 c..+5 front-mounted side-mounted side-mounted Mountable on 35 mm DIN Rail EN50 022 (Combined DIN/C Rail mounting not possible when using mechanical latch or mechanical interlock) Bulletin 100-C 4.6 (3/16) o 4,6 (3/16) o 25 (63/64) 45 (1-25/32) 187 (7-23/64) 48 (1-57/64) 132 (5-13/64) 4 (5/32) 175 (6-57/64) 73.5 (2-57/64) 66 (2-19/32) 50 23 (29/32) (1-31/32) 45 (1-25/32) 175 (6-57/64) 42 (1-21/32) Prestamping for pilot lamp 90 (3-35/64) o 20.5 (13/16) o 25.5 (1) Product Selection - Page 4-10 Rockwell Automation 4-61 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Dimensions Bulletin 100-C Dimensions are shown in millimetres and (inches) Mounting Position +... c2 od AC Control 11 25 5 11 b 4 d1 E E DC Control 5 11 5 11 5 25 25 11 5 +... AC Control Type d2 a c3 +... c1 c +... a 45 (1- 25/32) 45 (1- 25/32) 54 (2- 1/8) 72 (2- 53/64) b 81 (3- 3/16) 81 (3- 3/16) 81 (3- 3/16) 122 (4- 51/64) c 80.5 (3- 11/64) 97.5 (4) 100.5 (4- 7/64) 117 (4- 49/64) c1 75.5 (3- 3/32) 92.6 (3- 49/64) 95.6 (3- 7/8) 111.5 (4- 35/64) c2 6 (1/4) 6.5 (17/64) 6.5 (17/64) 8.5 (21/64) c3 4.5 (3/16) 4.5 (3/16) 5 (13/64) 5.5 (7/32) od 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 4 pcs each 5.4 (4 pcs each 7/32) d1 60 (2- 23/64) 60 (2- 23/64) 60 (2- 23/64) 100 (3- 15/16) d2 35 (1- 25/64) 35 (1- 25/64) 45 (1- 25/32) 55 (2- 11/64) 100-C09 ... 100-C23 100-C30 ... 100-C37 100-C43 100-C60 ... 100-C85 DC Control Type 100-C09Z ... 100-C16Z 100-C23Z 100-C30Z ... 100-C37Z 100-C43Z 100-C60Z ... 100-C85Z a 45 (1- 25/32) 45 (1- 25/32) 45 (1- 25/32) 54 (2- 1/8) 72 (2- 53/64) b 81 (3- 3/16) 81 (3- 3/16) 81 (3- 3/16) 81 (3- 3/16) 122 (4- 51/64) c 106.5 (4- 3/16) 123.5 (4- 55/64) 141.5 (5- 37/64) 144.5 (5- 11/16) 117 (4- 49/64) c1 101.5 (4) 119 (4- 43/64) 136.5 (5- 3/8) 140 (5- 33/64) 111.5 (4- 35/64) c2 6 (1/4) 6 (1/4) 6.5 (17/64) 6.5 (17/64) 8.5 (21/64) c3 4.5 (3/16) 4.5 (3/16) 4.5 (3/16) 5 (13/64) 5.5 (7/32) od 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 4 pcs each 5.4 (4 pcs each 7/32) d1 60 (2- 23/64) 60 (2- 23/64) 60 (2- 23/64) 60 (2- 23/64) 100 (3- 15/16) d2 35 (1- 25/64) 35 (1- 25/64) 35 (1- 25/64) 45 (1- 25/32) 55 (2- 11/64) Accessories AC Control Contactor with ... [mm] Auxiliary contact block, front-mounted Auxiliary contact block, side-mounted Pneumatic timing module Solid-State timing module (100-ETA) Solid-State timing module (100-ETB / 100-ETY) Mechanical interlock Mechanical latch Interface Suppressor module Marking with 2- or 4-pole 1- or 2-pole on coil connection side on coil connection side side-mounted on coil connection side on coil connection side sheets of labels marking sheets with cover label holder for System V4/V5 label holder for System Bul. 1492W [inches] [mm] [inches] c/c1 + 39 c/c1 + 1- 37/64 a+9 a + 23/64 c/c1 + 58 c/c1 + 2- 23/64 b + 24 b + 15/16 b + 24 b + 15/16 a+9 a + 23/64 c/c1 + 61 c/c1 + 2- 31/64 b+9 b + 23/64 b+3 b + 1/8 +0 +0 +0 +0 + 5.5 + 7/32 + 5.5 + 7/32 c/c1 + 39 c/c1 + 1- 37/64 a+9 a + 23/64 -- -- b + 24 b + 15/16 -- -- a+9 a + 23/64 -- -- -- -- b+3 b + 1/8 +0 +0 +0 +0 + 5.5 + 7/32 + 5.5 + 7/32 DC Control Mountable on 35 mm DIN Rail EN 50 022 Product Selection - Page 4-10 4-62 Rockwell Automation Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Dimensions Bulletin 100S-C Dimensions are shown in millimetres and (inches) Mounting Position +... c2 od AC Control 5 5 25 b d1 11 5 E E 4 DC Control 5 5 25 25 +... AC Control Type d2 a c3 +... c1 c a 45 (1- 25/32) 45 (1- 25/32) 54 (2- 1/8) 72 (2- 53/64) b 81 (3- 3/16) 81 (3- 3/16) 81 (3- 3/16) 122 (4- 51/64) c 119.5 (4-3/4) 136.5 (5-37/64) 139.5 (5-11/16) 156 (6-11/32) c1 114.5 (4-43/64) 131.6 (5-11/32) 134.6 (5-29/64) 150.5 (6-1/8) c2 6 (1/4) 6.5 (17/64) 6.5 (17/64) 8.5 (21/64) c3 4.5 (3/16) 4.5 (3/16) 5 (13/64) 5.5 (7/32) od 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 4 pcs each 5.4 (4 pcs each 7/32) d1 60 (2- 23/64) 60 (2- 23/64) 60 (2- 23/64) 100 (3- 15/16) d2 35 (1- 25/64) 35 (1- 25/64) 45 (1- 25/32) 55 (2- 11/64) 100S-C09...100S-C23 100S-C30...100S-C37 100S-C43 100S-C60...100S-C85 DC Control Type 100S-C09Z...100S-C16Z 100S-C23Z 100S-C30Z...100S-C37Z 100S-C43Z 100S-C60D...100S-C85D a 45 (1- 25/32) 45 (1- 25/32) 45 (1- 25/32) 54 (2- 1/8) 72 (2- 53/64) b 81 (3- 3/16) 81 (3- 3/16) 81 (3- 3/16) 81 (3- 3/16) 122 (4- 51/64) c 145.5 (5-49/64) 162.5 (6-7/16) 180.5 (7-5/32) 183.5 (7-17/64) 156 (6-11/32) c1 140.5 (5-37/64) 158 (6-1/4) 175.5 (6-61/64) 179 (7-3/32) 150.5 (6-1/8) c2 6 (1/4) 6 (1/4) 6.5 (17/64) 6.5 (17/64) 8.5 (21/64) c3 4.5 (3/16) 4.5 (3/16) 4.5 (3/16) 5 (13/64) 5.5 (7/32) od 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 2 pcs each 4.5 (2 pcs each 3/16) 4 pcs each 5.4 (4 pcs each 7/32) d1 60 (2- 23/64) 60 (2- 23/64) 60 (2- 23/64) 60 (2- 23/64) 100 (3- 15/16) d2 35 (1- 25/64) 35 (1- 25/64) 35 (1- 25/64) 45 (1- 25/32) 55 (2- 11/64) Accessories AC C control Contactor with ... [mm] Auxiliary contact block, side-mounted Solid-state timing module (100-ETA) Solid-state timing module (100-ETB / 100-ETY) Mechanical interlock Interface Suppressor Module Marking with 1- or 2-pole on coil connection side on coil connection side side-mounted on coil connection side on coil connection side sheets of labels marking sheets with cover label holder for System V4/V5 label holder for System Bul. 1492W a+9 b + 24 b + 24 a+9 b+9 b+3 +0 +0 + 5.5 + 5.5 [inches] a + 23/64 b + 15/16 b + 15/16 a + 23/64 b + 23/64 b + 1/8 +0 +0 + 7/32 + 7/32 [mm] a+9 b + 24 -- a+9 -- b+3 +0 +0 + 5.5 + 5.5 [inches] a + 23/64 b + 15/16 -- a + 23/64 -- b + 1/8 +0 +0 + 7/32 + 7/32 DC Control Mountable on 35 mm DIN Rail EN 50 022 Product Selection - Page 4-10 Rockwell Automation 4-63 Bulletin 100-M, 100-C, 104-C, 100S-C, 104S-C, CAB6 Contactors Dimensions Bulletin CAB6 Dimensions in millimetres e2 e1 oe c1 e4 Mounting Position 25 11 5 11 5 e1 16 20 25 e2 38.5 39 48 5 11 d1 4 d2 a od c Type CAB6-85, CAB6-105 CAB6-105-EI...CAB6-170-EI, CAB6-140 CAB6-210-EI ...CAB6-420-EI Contactor with ... Auxiliary contact block Mechanical interlock Terminal block HB 1 HB 2 HB 3 HA 1 HA 2 HA 3 a 120 120 155 b 170 170 205 c 156 156 180 [mm] e3 b c1 110.5 110.5 110.5 od 5.2 5.2 6.5 d1 145 145 180 d2 100 100 130 oe M6 M8 M10 e3 147 160 193 e4 8 10 12.5 P1 + P2 + P3, or + P4 a a + each 13.5 a+a b + each 7 b + each 7 b + each 8.5 b + each 20...40 b + each 15...40 b + each 11...50 c.. + 5 No change of base dimensions with 1 or 2 auxiliary contact blocks (P1, P2). With 3 or 4 auxiliary contact blocks (P3, P4), add 13.5 mm each. Suppressor module Label holder Bulletin CAB6 Mounting Plates M6 50 Type CAB6-105-PS CAB6-105-PU d1 b a 150 270 390 188 344 499 b 340 340 340 380 380 380 c 6 6 6 6 6 6 od 6.5 6.5 6.5 6.5 6.5 6.5 d1 315 315 315 315 315 315 d2 135 255 275 173 328.5 484 [kg] 1 1.8 2.5 1.4 2.6 3.75 CAB6-105-PY CAB6-250-PS CAB6-250-PU od 50 CAB6-250-PY d2 a C Product Selection - Page 4-10 4-64 Rockwell Automation Bulletin 100-G Contactors Bulletin 100-G Contactors * 315 ... 710 kW (550 ... 1200 A) 4 Table of Contents Description Page Description Specifications Performance Data / Characteristics . . . . . . . . . . . . . . . . . . . . 4-69 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-66 Accessories Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-67 Renewal Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-68 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-72 Standards and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-74 Electrical Life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-75 Permissible Switching Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-78 Page Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Rockwell Automation 4-65 Bulletin 100-G Contactors Product Selection 4 AC, DC Control AC-1 [A] 40 C 760 1000 1100 1200 1350 230 V 160 220 280 335 400 Switching of 3-phase Motors AC-2, AC-3 [kW] 400 V 315 400 500 600 710 500 V 400 500 630 750 850 690 V 500 630 710 900 1000 230 V 550 700 860 1000 1200 400 V 550 700 860 1000 1200 [A] 500 V 550 700 860 1000 1200 690 V 500 630 700 860 1000 EN Basic Number Cat. No. N.O. 2 2 2 2 2 N.C. 2 2 2 2 2 100-G55022 100-G70022 100-G86022 100-G100012 100-G120012 PQ 1 1 auxiliary contact (1 N.O. contact used in control circuit) Voltage Suffix Code For Use with 100-G550...100-G860 For Use with 100-G1000...100-G1200 50/60 Hz DC 50/60 Hz DC 100-110 V 110-120 V 200-220 V 220-240 V 345-380 V 380-415 V 400-440 V 440-480 V -- KD 110-115 V KD -- KD -- 110 V -- ZD -- KF 200-230 V KF -- KF -- 220 V -- ZA -- KN 240 V KA -- KN -- 380-400 V KN -- -- KB 440 V KB -- KB -- Price Adder for: Special control voltages Type 100-G550...100-G860 100-G1000, 100-G1200 Available Control Voltages 24...600 V 50/60 Hz, 24...440 VDC 48...600 V 50/60 Hz, 48...440 VDC No Surcharge > 25 pieces Power ratings: Preferred values according to IEC 60072-1 PQ = Package Quantity Accessories - Page 4-67 Specifications - Page 4-69 Dimensions - Page 4-78 4-66 Rockwell Automation Bulletin 100-G Contactors Accessories Modules Description Auxiliary Contact Blocks Up to 2 auxiliary contact blocks per contactor. With the EF22 auxiliary switch block, the switching point of the normally closed contact in relation to the main contacts can be altered. See instructions included with the auxiliary contact block. mounted between T1 and T2 13 21 31 43 For Use with Cat. No. PQ mounted between T2 and T3 53 61 71 83 1 100-G550...100-G860 100-EF22 4 14 22 32 44 54 62 72 84 Up to 4 auxiliary contact blocks per contactor. 1 make + 1 break 100-G1000, 100-G1200 1 make + 1 late break Fourth Main Contact Pole Left- or right-side mountable 100-G550 Ith AC-1 500 A 100-G700, 100-G860 100-G700, 100-G860 100-G1000, 100-G1200 100-EB11 100-EB11DC 100-NP500-5 100-NP500-6 1 100-NP1000-6 100-NP1000-7 Ith AC-1 900 A Mechanical Latch Mechanical life: 0.5 million operations Direct and impulse contact control 100-G550 Direct and impulse contact control 100-G700, 100-G860 100-FLAM5 100-FLAM6 1 100-G550 / 100-G550 100-G550 / 100-G700, 100-G860 Mechanical Interlock The interlocks are delivered factory-mounted 100-G700, 100-G860 / 100-G700, 100-G860 100-G700, 100-G860 / for 2 contactors mounted side by side 100-G1000, 100-G1200 100-G1000, 100-G1200 / 100-G1000, 100-G1200 100-G550 / 100-G550 100-G550 / 100-G700, 100-G860 100-G700, 100-G860 / for 2 contactors stacked vertically 100-G700, 100-G860 100-G700, 100-G860 / 100-G1000, 100-G1200 100-G1000, 100-G1200 / 100G1000, 100-G1200 100-MC00-5H 100-MC00-56H 100-MC00-6H 100-MC00-67H 1 100-MC00-7H 100-MC00-5V 100-MC00-56V 100-MC00-6V 1 100-MC00-67V 100-MC00-7V Voltage Suffix Code For Use with 100-G550...100-G1200 50/60 Hz 110-120 V KD 220-240 V KF 380-415 V KN 440-480 V KB Price Adder for: Special control voltages Type 100-FLAM Available Control Voltages 12...550 V 50/60 Hz upon request No Surcharge > 25 pieces PQ = Package Quantity Product Selection - Page 4-66 Rockwell Automation 4-67 Bulletin 100-G Contactors Accessories Renewal Parts Description 100-G550 Arc Chambers for Contactors For 3 poles 100-G700, 100-G860 100-AC860 For Use with Cat. No. 100-AC550 1 PQ 4 For 1 pole 100-G1000 100-AC1000 1 100-G1200 100-AC1200 100-G550 100-G700 Main Contacts for Contactors Set for 1 pole 100-G860 100-G1000 100-G1200 Coils and Supply Modules for Contactors Only available as renewal part Coils AC/DC control Supply Module AC/DC control 100-G550 100-G700...100-G860 100-G1000...100-G1200 100-G550 100-G700...100-G860 100-G1000...100-G1200 100-CP550 100-CP700 100-CP860 100-CP1000 100-CP1200 1 see Table below 1 see Table below Voltage Suffix Codes 100-G AC Standard Control Voltages 50/60 Hz 110...120 V 220...240 V 380...415 V 440...480 V DC Standard Control Voltages 100...110 V 200...220 V 345...380 V 400...440 V 100-G550 AC / DC Coil Code KD KF KN KB Coil Supply module Cat. No. TXS734 TXS747 TXS779 TXS780 100-G700... 100-G860 Coil AC Standard Control Voltages 50/60 Hz 110...115 V 220...230 V 380...400 V 440 V AC / DC Coil Code KD KF KN KB 100-G1000... 100G1200 Coil Cat. No. TX734 TX747 TX779 TX780 Cat. No. TY734 TY747 TY779 TY780 Supply module Cat. No. TYS734 TYS747 TYS779 TYS780 PQ Cat. No. TZ734 TZ747 TZ779 TZ780 1 Supply module Cat. No. TZS734 TZS747 TZS779 TZS780 PQ 1 Coils sold in pairs Price Adder for: Special control voltages Type 100-G550...100-G860 100-G1000, 100-G1200 Available Control Voltages 24...600 V 50/60 Hz, 24...440 VDC 48...600 V 50/60 Hz, 48...440 VDC No Surcharge >25 pieces PQ = Package Quantity Product Selection - Page 4-66 4-68 Rockwell Automation Bulletin 100-G Contactors Specifications IEC Performance Data 100-G550 AC-1, Three-phase Switching 100-G700 100-G860 100-G1000 100-G1200 Ambient temperature 40 C Ie 690 V 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V 690 V 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V [A] [kW] [kW] [kW] [kW] [kW] [kW] [kW] [A] [kW] [kW] [kW] [kW] [kW] [kW] [kW] [A] [A] [A] [A] [A] [kW] [kW] [kW] [kW] [kW] [kW] [A] [A] [kW] [kW] [kW] [kW] 760 303 316 527 546 658 908 1 316 605 241 251 419 435 524 723 1 048 520 550 550 550 500 160 185 315 315 400 500 140 140 45 47 78 81 1 000 398 416 693 719 866 1 195 1 732 800 319 333 554 575 693 956 1 386 700 700 700 700 630 220 220 400 425 500 630 180 180 57 60 101 105 1 100 438 457 762 791 953 1 315 1 905 870 347 362 603 625 753 1 040 1 507 810 860 860 860 700 280 300 500 530 630 710 210 210 67 70 118 122 1 200 478 499 831 863 1 039 1 434 -- 960 382 399 665 690 831 1 147 -- -- 1 000 1 000 1 000 860 335 335 600 630 750 900 260 260 83 87 146 151 1 350 538 561 935 970 1 169 1 613 -- 1 085 432 451 752 780 940 1 297 -- 1 215 1 200 1 200 1 200 1 000 400 400 710 750 850 1 000 300 300 97 101 170 176 4 Ambient temperature 60 C Ie Constant Current - UL/CSA General Purpose Rating 40 C Switching of 3-phase Motors AC-2, AC-3, AC-4 230/240 V 400/415 V 500 V 690 V 230 V 240 V 400 V 415 V 500 V 690 V AC-4 at 200 000 operations 230/240 V 400/415 V 230 V 240 V 400 V 415 V AC-4, Squirrel-cage motors with reversing and jogging at 20 000 (25 000), operations 230/240 V 400/415 V 230 V 240 V 400 V 415 V Switching of 3-phase Motors - UL/CSA 60 Hz/60 C 200 V 230 V 460 V 575 V 200 V 230 V 460 V 575 V [A] [A] [kW] [kW] [kW] [kW] [A] [A] [A] [A] [HP] [HP] [HP] [HP] 360 350 116 111 198 206 414 360 414 336 150 150 350 350 430 420 139 151 238 247 552 602 590 472 200 250 500 500 520 520 170 177 295 300 692 722 708 576 250 300 600 600 (630) (630) (205) (214) (357) (359) -- -- -- -- -- -- -- -- (700) (700) (228) (245) (414) (424) 1 185 1 130 1 062 864 450 450 900 900 At rated voltage 415V and rated current: Life span -25 % Power ratings: Preferred values according to IEC 60072-1 Product Selection - Page 4-66 Rockwell Automation 4-69 Bulletin 100-G Contactors Specifications IEC Performance Data 100-G550 Rated making capacity AC-4 Ie 415 V 500 V 690 V 240 V 400 V 415 V 500 V 690 V 500 V 690 V 230 V 240 V 400 V 415 V 500 V 690 V 1 000 V [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [kW] [kW] [kW] [kW] [kW] [kW] [kW] 5 500 5 500 5 000 5 500 4 500 4 500 4 500 4 500 953 831 310 324 540 561 705 883 615 250 600 600 100-G700 7 000 7 000 6 300 7 000 5 600 5 600 5 600 5 600 1 212 1 091 395 412 717 745 897 1 138 866 450 800 800 100-G860 8 600 8 600 7 000 8 000 6 900 6 900 6 900 6 000 1 490 1 195 485 507 882 915 1 102 1 247 970 500 1 000 1 000 100-G1000 10 000 10 000 8 600 8 000 8 000 8 000 8 000 6 900 1 732 1 490 565 589 1 025 1 088 1 309 1 554 -- 650 1 300 1 500 100-G1200 12 000 12 000 10 300 9 600 9 600 9 600 9 600 8 000 2 078 1 732 677 707 1 250 1 278 1 538 2 078 -- 750 1 500 1 500 Rated breaking capacity AC-4 Ie 4 Star-Delta Starting 50 Hz 230 V [A] 460 V [A] 575 V [A] Short-circuit Protection of Contactors without Overload Relay Fuse gG (aM) Type 1 coordination per IEC 947-4-1 500 V [A] 690 V [A] Switching of Three-phase Capacitor Motors Inductivity of dispatching between parallel switched capacitors: min. 6 H Single capacitors 40 C 230 V [kVar] 240 V [kVar] 400 V [kVar] 415 V [kVar] 500 V [kVar] 690 V [kVar] 55 C 230 V [kVar] 240 V [kVar] 400 V [kVar] 415 V [kVar] 500 V [kVar] 690 V [kVar] Control capacitors 40 C 230 V [kVar] 240 V [kVar] 400 V [kVar] 415 V [kVar] 500 V [kVar] 690 V [kVar] 55 C 230 V [kVar] 240 V [kVar] 400 V [kVar] 415 V [kVar] 500 V [kVar] 690 V [kVar] Star-Delta Starting 60 Hz (630) (630) 800 800 1 000 1 000 1 000 1 000 1 250 1 000 180 200 320 350 450 580 150 170 280 300 360 500 180 200 320 350 450 580 150 170 280 300 360 500 220 250 400 430 520 700 180 200 330 360 420 580 220 250 400 430 520 700 180 200 330 360 420 580 250 300 450 500 600 800 220 260 400 450 540 720 250 300 450 500 600 800 220 260 400 450 540 720 290 325 500 550 660 875 275 300 460 500 600 800 290 325 500 550 660 875 275 300 460 500 600 800 330 360 575 630 750 1 000 325 350 550 600 720 950 330 360 575 630 750 1 000 325 350 550 600 720 950 Product Selection - Page 4-66 4-70 Rockwell Automation Bulletin 100-G Contactors Specifications IEC Performance Data 100-G550 Switching of DC Loads Switching of non- or slightly inductive loads, resistance furnaces DC-1 at 60 C 1-pole 24/48 V 2 Poles in series 24/48 V 3 Poles in series 24/48 V 110 V 220 V Shunt Motors Starting, regenartive brake, reverse, Jogging DC-3, 60 C 3 Pole in Serie 24/48 V Series-characteristic Motors Starting, regenartive brake, reverse, Jogging DC-5, 60 C 3 Pole in Serie 24/48 V Switching of Lamps Electric discharge lamps AC-5a Single compensated: open close Incandescent lamps AC-5b Electrical Lifespan ~ 100 000 operations Switching of Transformers AC-6a Switch-on peak load Rated transformer current =n [A] [kVA] [kVA] [kVA] [kVA] [kVA]] [A] [A] [A] [A] [A] [A] [A] [Min.] [m] [W] [W] [W] 259 248 248 225 389 517 5 500 5 500 4 400 3 800 2 300 1 300 850 60 0.11 99 110 109 330 315 315 284 495 660 7 000 7 000 5 600 5 000 2 800 1 800 1 150 60 0.1 147 172 169 405 390 390 315 608 810 8 000 8 000 6 900 6 000 3 400 2 000 1 350 60 0.08 177 202 199 470 450 450 450 700 945 10 000 10 000 8 000 7 400 4 000 2 300 1 600 60 0.06 300 370 360 570 540 540 540 850 1 130 12 000 12 000 9 600 8 500 4 800 2 700 1 900 60 0.05 318 388 378 100-G700 100-G860 100-G1000 100-G1200 [A] [A] [A] [A] [A] 645 645 645 480 315 760 760 760 560 400 930 930 930 630 450 1 020 1 020 1 020 800 500 1 150 1 150 1 150 900 600 4 [A] 605 800 870 960 1 085 [A] 605 800 870 960 1 085 [A] [A] 450 360 315 570 460 440 700 550 500 850 660 560 1 000 800 630 [A] Rated transformer current n = 30 400 VAC 500 VAC 690 VAC n = 20 n = 15 Short-time Withstand ICW, 60 C 1s 4s 10 s 15 s 60 s 240 s 900 s Minimum Cooling Time at Zero Current Resistance and Power Dissipation Main current circuit resistance Power dissipation of all at Ie AC-3 Total power dissipation AC control at Ie AC-3 DC control Product Selection - Page 4-66 Rockwell Automation 4-71 Bulletin 100-G Contactors Specifications IEC Performance Data 100-G550 Lifespan mechanical AC control DC control AC-3 (400 V) AC control DC control [Mio. operations] [Mio. operations] [Mio. operations] [kg] [kg] 100-G700 5 5 0.6 13.8 26.4 28.4 50.3 53.4 100-G860 100-G1000 1 1 100-G1200 Weight 4 Connections Main Contacts Terminal type Connections Contactor Hole diameter c s b c s b [mm2] [mm] c s b 6x40 (1) x o13 50 25 2x5 12.5 5x50 60 25 2x5 13 8x50 (1) x o15 60 25 2x6 15 10x50 (2) x o17 60 25 2x6 2 x 13 10x60 60 25 2x8 2 x 13 90 100-LG7 (4) x 35...300 (4) x No. 2...600 MCM b max. c max. s max. O max. [mm] [mm] [mm] [mm] Recommended torque With terminal lug Wire cross-section acc. to EC 60947-1 Wire cross-section acc. to UL/CSA Auxiliary contact Coils 50 60 75 90 100-LG5 100-LG6 100-LG6 100-LG7 (2) x 35...300 (3) x 35...300 (3) x 35...300 (4) x 35...300 [mm2] [AWG] (2) x No. 2...600 MCM (3) x No. 2...600 MCM (3) x No. 2...600 MCM (4) x No. 2...600 MCM (2) x 4 [mm2] (2) x 4 [mm2] Nm] Product Selection - Page 4-66 4-72 Rockwell Automation Bulletin 100-G Contactors Specifications Control Circuits 100-G550 Operating Limits AC- 50 Hz AC- 60 Hz DC control Pick-up and Holding Power AC- 50 Hz AC- 60 Hz DC control Switching Delay AC DC accelerated delayed pick-up dropout pick-up dropout pick-up dropout pick-up holding pick-up holding pick-up holding [x Us] [x Us] [x Us] [x Us] [x Us] [x Us] [VA] [VA/W] [VA/W] [VA/W] [W] [W] [ms] [ms] [ms] [ms] 100-G700 100-G860 0.85...1.1 0.2...0.5 0.2...0.5 0.2...0.5 800...950 9...11 800...950 9...11 700...850 8...10 0.15...0.5 0.85...1.1 0.15...0.5 0.85...1.1 0.15...0.5 1 350...1600 21...25 1 350...1 600 21...25 1 300...1 550 18...22 0.3...0.6 2400 70 2400 70 2100 60 50...100 25...50 50...100 25...50 0.3...0.6 0.3...0.6 100-G1000 100-G1200 4 closing delay opening delay closing delay opening delay 50...100 20...50 / 150...200 / 500...1 000 50...100 20...50 / 150...200 / 500...1 000 Product Selection - Page 4-66 Rockwell Automation 4-73 Bulletin 100-G Contactors Specifications Auxiliary Contact Blocks 100-G550 Switching of AC Loads AC-1 Ith AC-15 at rated voltage of 120 V 230 V 240 V 400 V 415 V 500 V 690 V [A] [A] [A] [A] [A] [A] [A] 6 3 3 2 2 1.5 1 6 3 3 2 2 1.5 1 at 40 C at 60 C [A] [A] 100-G700 16 12 100-G860 100-G1000 16 12 100-G1200 4 Switching of DC Loads DC-13 Switching of electromagnets at 24 VDC [A] 48 VDC [A] 110 VDC [A] 220 VDC [A] Fuse Short-circuit protection with no welding of contacts according to IEC 947-5 Fuse gG [A] 6 3 1 0.5 6 3 1 0.5 10 16 General 100-G550 Rated Isolation Voltage Ui IEC, AS, BS, SEV, VDE 0660 UL/CSA Testing Voltage 1 minute according to IEC 947-4 Rated Voltage Ue AC 50/60 Hz DC Insulation Class of the Coil Rated Coil Frequency Ambient Temperature Storage Operation at rated current Climatic Withstand Site Altitude Protection Class Shock Protection Certifications Approvals [V] [V] [V] [V] [V] 100-G700 1 000 600 3 500 230, 240, 400, 415, 500, 690 100-G860 100-G1000 690 600 2 500 230, 240, 400, 415, 500, 690 24, 48, 110, 220, 440 Class B according to VDE 0660, table 22 AC 50/60 Hz, DC 100-G1200 [C] [C] [m] -40 ...+80 -25 ...+60 Damp alternating conditions cyclical, according to DIN 50 016 and 40 046, Part 38, IEC 68 2000 NN, according to IEC 947-1 IP00 IEC 529 / DIN 40 050 Finger- and back of hand proof according to VDE 0106, Part 100 IEC 947, CEI 17-2, 17-3; UTE NF C 63-110; BS 5424; VDE 0660-1; NEMA; ICS CE, UL Listed, CE, UL Listed, Lloyd's Register of Shipping CE, Lloyd's Register of Shipping Lloyd's Register of Shipping Product Selection - Page 4-66 4-74 Rockwell Automation Bulletin 100-G Contactors Specifications Electrical Life 100-G AC-3 Switching of running three-phase motors AC-1 Non or slightly inductive loads, resistance furnaces 10 4 Contact life [millions of operations] 1 100-G-550 100-G-700 100-G-860 100-G-1000 100-G-1200 (AC-1) 10000 0.1 100 1000 Rated operating current Ie AC-1 / AC-3 [A] (Dashed curves - - - for AC-1 only, open) 1 100-G AC-4 Stepping of squirrel-cage motors 10 1 Contact life [millions of operations] 0.1 0.01 100-G-1000 100-G-1200 100-G-550 100-G-700 100-G-860 0.001 10 100 1000 10000 Rated operating current Ie AC-4 [A] Product Selection - Page 4-66 Rockwell Automation 4-75 Bulletin 100-G Contactors Specifications Electrical Life 100-G AC-3 90 % Switching of running motor AC-4 Stepping 10 4 Contact life [millions of operations] 1 0.1 0.01 100 1000 100-G-1000 100-G-1200 100-G-550 100-G-700 100-G-860 10000 Rated operating current Ie AC-3 / AC-4 [A] Permissible Switching Rate 100-G Switching of running squirrel-cage motors (AC-3) Relative running time 40 %, starting time tA = 0.25 s 1000 100-G-700 100-G-860 100-G-550 Permissible switching rate [operations/hour] 100-G-1000, 100G -1200 100-G-1000 short time 100 10 100 1000 10000 Rated operating current Ie [A] Product Selection - Page 4-66 4-76 Rockwell Automation Bulletin 100-G Contactors Specifications Permissible Switching Rate 100-G Switching of running squirrel-cage motors (AC-3) Relative running time 40 %, starting time tA = 1 s 100-G-1000, 100G -1200 1000 Permissible switching rate [operations/hour] 100-G-550 100 100-G-700 100-G-860 4 100-G-1000 short time 10 100 Rated operating current Ie [A] 1000 10000 100-G Switching of starting motors (AC-2 and AC-4) Starting time tED = 1 s (< tA) 100-G-1000, -1200 100-G-700, -860 100-G-550 1000 Permissible switching rate [operations/hour] 100 100-G-1000 short time 10 100 100-G-860 short time 1000 10000 Starting current Ie [A] Product Selection - Page 4-66 Rockwell Automation 4-77 Bulletin 100-G Contactors Dimensions 100-G Dimensions [millimetres] Mounting Position 25 e2 e1 od oe c1 25 25 25 4 d1 e3 d2 a e3 b1 b c Type 100-G550 100-G700 100-G860 100-G1000 100-G1200 a 220 280 280 334 334 b 258 307 361 490 490 b1 228 277 325 434 434 c 225 291 291 345 345 c1 164 203 203 231 231 od 9 11 11 13 13 d1 220 280 280 380 380 d2 110 175 175 120 120 oe 12.5 13 15 2x13 2x13 e1 40 50 50 50 60 e2 79 101 101 100 100 e3 -- -- -- 40 40 Contactors with: Auxiliary contact block mechanical interlock side-by-side 100-G [mm] a stacked vertically 4th main pole mechanical latch 100-G550/100-G550 100-G700, G860/100-G700, G860 100-G1000, G1200/100-G1000, G1200 100-G550/100-G700, G860 100-G700, G860/100-G1000, G1200 100-G550/100-G550 100-G700, G860/100-G700, G860 100-G1000, G1200/100-G000, G1200 100-G550/100-G700, G860 100-G700, G860/100-G1000, G1200 100-G550 100-G700, G860 100-G1000, G1200 100-G550 100-G700 100-G860 100-G1000, G1200 a+42+a a+32+a a+46+a a+37+a a+73+a b+56 + b b+100...200+b b+230...280+b b+100...200+b b+230...280+b a+74 a+68 a+76 b+59 b+64 b+37 a+30 Insulation partition plate 100-G1200 (UL regulation) Product Selection - Page 4-66 4-78 Rockwell Automation |
Price & Availability of 195-MB02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |